Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

TI solution supports 1394 network data transfer

Posted: 13 May 2004 ?? ?Print Version ?Bookmark and Share

Keywords:1394 network? texas instruments? ti? 1394a link-layer-controller? physical-layer-controller?

Providing consumer electronics designers with advanced functionality to communicate A/V data across a 1394 (FireWire) network, Texas Instruments Inc. (TI) has announced a new cost-effective, integrated 1394a link-layer-controller and two-port physical-layer-controller (PHY).

The new technology, which has a PCI host interface option, gives designers of multi-media applications an off-the-shelf component that facilitates the communication of compressed A/V data and digital audio according to the IEC61883 standard.

The TSB43DA42 and TSB43DB42 Link and PHY each includes three high speed data interface (HSDI) ports. Each port, which supports I/O of data, is dedicated to an isochronous data path and can be independently configured to transmit/receive to and from 1394. Additionally, all three ports support seamless connections to the various codecs on the market. The integrated two-port PHY is capable of communicating at 400-, 200-, or 100Mbps.

"In the consumer electronics market it is necessary that devices be able to communicate A/V data efficiently and effectively," said Cecelia Smith, marketing manager for TI's consumer networking group. "With cost effective integration, fast transmit speeds and high levels of content protection, TI's technology meets this and many more industry requirements."

Equipped with digital transmission content protection (DTCP), the TSB43DA42 can handle all of the formatting of the IEC61883 packets. To do this, the device must first be configured by an external CPU which is connected to the host interface using either a PCI or SRAM/68K bus. The TSB43DB42 is pin-for-pin compatible with the TSB43DA42, but does not include DTCP. When transmitting to the 1394 network, the codecs will be responsible for outputting the compressed data, and the device will generate and output the IEC61883 packet containing the data. When receiving data from the 1394 network, TSB43DA42 will remove the 1394 headers and timestamps from the IEC61883 packet and then output the compressed A/V data to the codec.

The TSB43DA42 and the TSB43DB42 are available in a 196-pin MicroStar BGA package that measures 15-by-15mm. Suggested resale pricing in quantities of 1,000 is $8.25 for the TSB43DA42 and $7.85 for the TSB43DB42.





Article Comments - TI solution supports 1394 network da...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top