Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > T&M
?
?
T&M??

Channel emulator features accuracy, repeatability

Posted: 19 Jun 2006 ?? ?Print Version ?Bookmark and Share

Keywords:LitePoint? TrueChannel? channel emulator? MIMO? SISO?

TrueChannel Emulator

LitePoint Corp. has announced the new TrueChannel Emulator that promises to reproduce highly accurate multipath environments for testing up to 4X4 multiple input/multiple output (MIMO) or single input/single output (SISO) wireless solutions.

According to the company, the new device works with wireless integrated circuit and board-level products enabling researchers, developers and verification teams to stress a device-under-test's (DUT) algorithms and hardware designs. Furthermore, it allows developers and product managers to evaluate the performance of multiple products and validation testing under the same environmental conditions.

The TrueChannel Emulator provides end-to-end RF connectivity with the ability to accurately enable measurements of a DUT's response to a standardized or user-defined channel, the company said. Channel emulation is particularly critical to the latest MIMO systems, including 802.11n, where the ability to test algorithms and products against complex channel models is important to measure and validate the DUT with real-world effects such as multipath, fading and cross-channel correlation.

Accuracy and repeatability of the channel model is achieved by implementing a low latency, custom digital signal processor supported by high dynamic range, high isolation Rx and Tx radio frequency interfaces, said LitePoint. The device supports all 802.11 requirements operating in both 2.4GHz and 5GHz frequency bands with a channel bandwidth greater than 40MHz. All Rx/Tx ports are fully bidirectional with automatic switching and per-channel gain control, explained the company.

LitePoint said the new device is very easy to use. User set up of the system is done through an included GUI. Once set up, the system runs automatically. Automation is supported through either a C++ or MATLAB compatible API. Through these interfaces, the user defines channel model characteristics. Included are TGn channel models or the user can define their own models. Individual channel attenuation can be controlled for modeling roaming scenarios. Channel models can be dynamically changed at any time during packet transmissions to emulate changing environments and is supported by an interpolator which ensures smooth transitions between models. The system can be configured to provide physical layer link performance PER data in real time and works with popular performance analysis packages such as Ixia's IxChariot or iPerf.

The TrueChannel Emulator is available in 2X2, 3X3 or 4X4 configurations. Systems can be expanded after initial purchase with TrueChannel Rx/Tx Expansion Modules.




Article Comments - Channel emulator features accuracy, ...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top