Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Power/Alternative Energy
?
?
Power/Alternative Energy??

I?C bus buffer enhances system reliability

Posted: 21 Dec 2006 ?? ?Print Version ?Bookmark and Share

Keywords:1²C? bus buffer? power management? Linear Technology? bus?

LTC4307 I?C bus buffer from Linear

Linear Technology has introduced an I?C bus buffer with low offset and stuck bus recovery that increases the reliability of systems using the I?C bus. With the growth in the number and complexity of plug-in boards, the addition of each new device adds to already accumulated offset voltages and can result in exceeded valid logic low specification.

Low offset feature
The LTC4307 adds only 50mV of logic low offset voltage between input and output, instead of the typical 100mV or more, allowing users to cascade several of this device in series, while meeting VOL levels and maintaining large noise margins. As a result, larger systems can be divided into many smaller, less capacitive and therefore faster bus segments. The low offset feature of the LTC4307 makes it suitable for high availability systems, such as AdvancedTCA- and ?TCA-based servers and networking equipment, which require large I?C busses for critical system management functions.

The LTC4307 also features stuck bus recovery circuitry that helps maintain system integrity by detecting and clearing stuck busses. If the serial data output (SDAOUT) or serial clock output (SCLOUT) are low for more than 30ms, the LTC4307 will automatically break the data and clock bus connections and will generate up to 16 clock pulses on the SCLOUT in an attempt to free the bus. When the bus becomes free, a connection will be immediately enabled for proper operation to resume. In essence, the LTC4307 will effectively eliminate the need for a general system reset.

Extra ruggedness
Furthermore, the LTC4307 provides capacitive isolation between the backplane and the card's I?C busses, even if their respective supplies are at different levels. Since the level translation is performed without a second supply pin or a second pair of input pull-up resistors, a dedicated connector pin for the backplane supply voltage is not required. In addition to facilitating live card insertion or removal, the SDA and SCL pins withstand 8kV ESD, providing extra ruggedness and protecting the cards from damage due to handling.

The LTC4307 is suitable for advanced computing, networking and data storage systems that use a large number of I/O cards with different supply and bus voltage levels. The LTC4307 is available in 8-lead MSOP and 3-by-3mm DFN packages. Specified over the commercial and industrial temperature ranges, pricing begins at $2.15 each for 1,000-piece quantities.




Article Comments - I?C bus buffer enhances system ...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
Related Datasheets
Part Number Description Category
? LTC4307 Low Offset Hot Swappable 2-Wire Bus Buffer with Stuck Bus Recovery EDA - Embedded Systems Design

?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top