Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Power/Alternative Energy
?
?
Power/Alternative Energy??

Japan drafts Li-ion battery safety guidelines

Posted: 18 Jun 2007 ?? ?Print Version ?Bookmark and Share

Keywords:burning Li-ion batteries? notebook PC batteries safety? Japan guidelines for Li-ion batteries?

Tales of burning notebook PCs that hit the news last year raised serious concerns among consumers about the safety of Li-ion batteries. Responding to those fears, Japan's battery and PC industries have jointly hammered out guidelines for the safe use of Li-ion batteries. The industries' task force has also presented its proposal to the International Electrotechnical Commission (IEC).

"We have worked hard since last October for Li-ion battery safety. The resulting guidelines are designed to eliminate serious problems, such as catching fire," said Masami Yamamoto, corporate VP of Fujitsu Ltd, who chaired the safety committee formed last year by the Japan Electronics & Information Technology Industries Association (JEITA) and the Battery Association of Japan (BAJ).

As the next step, the team intends to expand the guidelines beyond notebooks to other applications, such as cellphones.

The guidelines are not intended to clarify the cause of each overheating problem that cropped up last year or to offer practical solutions in specific casescountermeasures are the responsibility of each supplier, said Kensuke Nakatani, chairman of BAJ's portable rechargeable-battery division. "The guidelines are not for the treatment of each case, but represent precautions."

The guidelines cover three major areas: battery cell design, battery package design, and test and evaluation criteria. The BAJ team worked on the cell design requirement and the JEITA team on package design. Then the teams worked together to compile the other guidelines.

According to the document, it is fundamental for battery makers to establish production processes that do not allow foreign metal particles to enter into battery cells. Such mingling will cause an internal short circuit.

If an internal short circuit should occur, the guidelines require that manufacturers maneuver cell structures and materials in such a way that the battery cells would not overheat easily. The effect of the scheme chosen to accomplish that needs to be verified under the test-and-evaluation methodology that the proposal defines.

Safety range
The guidelines also define the safety range for each battery cell. For widely used Li-ion battery cells with LiCoO2 anodes, the guidelines set the highest voltage for charging at 4.25V. The operating temperature range is 10C to 45C.

The high-voltage limit was set based on the reversible reaction of LiCoO2 crystal-lattice transformation. Beyond 4.25V, the lattice is destroyed and shows no reversibility.

"The guidelines define the highest chargeable voltage but do not define how to charge. That's up to the PC vendors," said Koji Sekai, deputy general manager at Sony Corp.'s energy business group.

If they comply with this guideline, however, PC vendors would find it virtually impossible to offer high-speed charging, since that usually demands a higher voltage than the one normally used.

Battery cell test is generally done during the production process. To increase safety, Japan's guidelines propose adding a new test using a charged cell. In between the electrodes, a metal particle is intentionally inserted and pressed to generate a short circuit. The test will make it possible to observe the behavior of the cell with an internal short circuit.

Battery pack design
Li-ion batteries are not used alone in notebook PC applications. Instead, multiple cells are ganged together in a package. Usually, two cells are arranged in parallel to form a block and several blocks are connected serially. Hence the guidelines' discussion of battery-pack design requirements.

The guidelines detail ways to avoid thermal runaway, such as block layout, precise charging-voltage control on a per-block (not per-package) basis and separation of the control circuit board from battery cells.

JEITA and BAJ have proposed via the subcommittees of IEC in Japan that their document be sent to the IEC SA-21 and IEC TC-108 committees.

- Yoshiko Hara
EE Times




Article Comments - Japan drafts Li-ion battery safety g...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top