Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Manufacturing/Packaging
?
?
Manufacturing/Packaging??

IBM fab starts using Pb-free packaging process

Posted: 23 Jul 2007 ?? ?Print Version ?Bookmark and Share

Keywords:IBM fab? Pb-free packaging? Pb-free process?

IBM Corp. has started using a Pb-free process that reduces the cost of packaging flip-chip devices. The chipmaker's East Fishkill, New York fab in the United states is one of the first production facilities to use Controlled Collapse Chip Connection New Process (C4NP), a technique IBM projects could achieve 99.7 percent yields.

IBM is among the chipmakers who have signed licensing deals with German packaging equipment maker SUSS MicroTec AG.

Flip-chip solder bumps are deposited by electroplating, which involves dipping wafers into a chemical bath, eletro-depositing the bumps, then disposing of the toxic chemicals in the bath. C4NP, which has been under development since 2004, uses a nozzle to inject molten solder into a wafer-scale mold. Bumps can then be applied to the entire wafer.

Pb-free Controlled Collapse Chip Connection New Process fabricates bumps from a template, then adds them en masse to a wafer before dicing.

"After filling the bump mold with solder and inspecting it to make sure we have 100 percent perfect fill, we then transfer it to the wafer in a single step," said David Seeger, head of IBM's research packaging efforts. "The wafer only sees that single step in the process, which is a much more economical way to prepare a chip package."

As chip costs plummet, the proportion of manufacturing effort associated with packaging has increased. For some chips, according to IBM, packaging costs are exceed the cost of semiconductor dice. C4MP is being touted as bringing the cost of packaging back in line with the cost of the die.

The eco-friendly technique also eliminates the need to safely dispose of electrochemical bath wastes since the entire C4NP process is performed by mechanical steps that involve no liquid chemistry.

Controlled Collapse Chip Connection New Process

"Electroplating uses a wasteful chemical bath. C4NP instead injects molten solder through a head that is not only less costly, but also eliminates all the waste associated with disposing of bath after it is used," said Barry Hochlowski, product offering manager C4 bump & test.

According to IBM, the C4NP process also opens up a range of chip design possibilities since current solder ingots or wire-forms can be used with the equipment supplied by SUSS MicroTec.

"For EEs, this means they now have much wider flexibility in solder selection," said Barry Hochlowski of IBM's Microelectronics Division. "Unlike normal electroplating, where there are only a couple of options for the solder chemistry, the ingots and wire-forms for C4NP are available using a wide variety of lead-free materials."

C4NP permits binary, ternary and quaternary alloys and also minimizes the recurring cost of consumables. C4NP can also be used for both 200mm and 300mm wafers and wafer-handling equipment that is available form SUSS Microtec.

- R. Colin Johnson
EE Times




Article Comments - IBM fab starts using Pb-free packagi...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top