Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

350mA buck boost LED driver using bipolar junction transistors, high side current sensing and a NCP3063 controller

Posted: 31 Jan 2008 ?? ?Print Version ?Bookmark and Share

Keywords:buck boost LED driver? controller? transistor?

Unlike traditional lighting, LEDs require driver solutions that address the challenges of providing a constant current to a load whose output voltage can vary by 30 percent because of process and temperature effects.

Due to the steep V/I curve of the LED and to achieve optimum performance, it is critical to drive LEDs with a constant current to achieve the specified brightness and color. For high brightness power LEDs, the specified current may be in the range 150- to 1500mA, 350mA being a common value.

By combining LED manufacturer's data, taken from several product families, it is possible to come up with minimum and maximum forward voltage drops for a "generic" LED, operating at a specified current.

This application note and associated demo board will focus on driving multiple LEDs, at a regulated 350mA, from low voltage DC or AC sources commonly used in lighting applications.

View the PDF document for more information.




Article Comments - 350mA buck boost LED driver using bi...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top