Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Power/Alternative Energy
?
?
Power/Alternative Energy??

TRIACs require no parameter derating up to 150C

Posted: 27 Feb 2008 ?? ?Print Version ?Bookmark and Share

Keywords:high-temperature TRIACs? no derating? TRIode for Alternating Current?

ZCAT08V-BK

STMicroelectronics has unveiled a series of high-temperature TRIode for AC (TRIACs), which maintain full specified performance up to a junction temperature of 150C, and which deliver outstanding turn-off capabilitysuitable for appliance motor-control applications, in particularat their maximum temperature. The high-junction-temperature TRIACs will enable manufacturers to lower their costs by using considerably smaller heatsinks, and also allow the end product to benefit from more reliable operation in hot environments.

The use of conventional TRIACs, which are specified at 125C junction temperature, can cause a loss of control of the AC load in environments above this temperature, which can lead to hazardous application behavior, due to device parameter derating above 125C. However, ST's HiTj Snubberless series requires no derating of any of its parameters up to the maximum junction temperature and achieves a turn-off performance at 150C, which is 3-4x better than normal. In addition, the TRIACs deliver high-noise immunity of up to 1,500V/?s. Further cost savings are possible for manufacturers through the elimination of RC snubber circuits and noise filters.

The TRIACs are ideal for use in universal motor-control applications, such as vacuum cleaners, washing-machine drum motors and industrial drives; in hot environments such as cookers, ovens, kitchen hobs and coffee machines; and for achieving higher power density on PCBs, for heater and high-power motor control. They can also replace conventional TRIACs in closed environments where the ambient temperature is too high.

The HiTj TRIAC series is produced in TO-220AB, TO-220AB insulated (ceramic), and in D2PAK surface-mount packages, for maximum versatility. They are all 600V devices, with current ratings of 8A, 10A, 12A, 16A and 20A. The sensitivity range offered today is 35mA to 50mA and will soon be extended with 10mA devices.

The devices are available now in volume production, priced from 50 cents to $1 in 1,000-unit quantities.

STMicroelectronics is one of the exhibitors in the upcoming IIC-China 2008.




Article Comments - TRIACs require no parameter derating...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top