Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Sensors/MEMS
?
?
Sensors/MEMS??

ICs ready for medical practice

Posted: 01 Apr 2008 ?? ?Print Version ?Bookmark and Share

Keywords:medical segment? electronics engineering? wireless monitor?

A wireless silicon monitor that can be worn like a Band-Aid and then thrown away. A chip that could become one of the first commercial retina replacements. A device that measures waveforms still being discovered deep within the brain.

These advances give credence to a rising belief that biology will be one of the next big application areas in electronics.

"I am actually recommending engineers get two degreesone in electronics engineering and another in a natural-sciences field," said Mark McDermott, research fellow at the University of Texas at Austin. "The medical problems are getting very interesting for engineers," said McDermott, who has also worked as an engineering manager at Freescale Semiconductor Inc. and Intel Corp.

Arto Nurmikko, a professor of engineering at Brown University, has designed brain implants that involved work in electronics, optics and anatomy. "This is absolutely a cross-disciplinary world of computer science, engineering, biology and even the precision mechanics of drilling holes like a Swiss watchmaker. That's what it takes," said Nurmikko.

In the near future, patients equipped with wireless wearable sensors will receive regular checkup reports from their doctors without having to visit a hospital, said Hyung Kyu Lim, CEO of the Samsung Advanced Institute of Technology.

"Health care devices and service robots are prime examples of emerging consumer products for such new services," said Lim. "However, the system complexity and implementation of these future services will be costly due to the high level of machine intelligence required."

Wearable devices
For example, startup Toumaz Technology Ltd has a custom chip designed to power a wireless monitor that could be worn on a disposable patch. The chip is one of an emerging group of smart wearable devices that help patients and consumers get medical monitoring from the comfort of home.

"We not only have an aging society, but one that does not have a healthy lifestyle," said Alison Burdett, director of technology for Toumaz. "There are increasing numbers of people with chronic ailments, and that's putting an enormous burden on health care systems worldwide."

To keep power down and reliability up, Toumaz developed custom hardware and protocols for the 800MHz to 900MHz wireless network the devices use at data rates up to 50Kbit/s. The chip draws 2.5mA when communicating, but its digital control portion dissipates just 100?W.

"A custom media access controller is crucial, because in short-range communications there is always interference, and we have many layers of mitigation," Burdett said.

Despite the custom design, the active patch is expected to cost as little as $5 when it hits the market next year. The 16mm2 chip will account for a small fraction of that cost. It will be made in a 130nm process by Infineon Technologies AG.

"When this is in volume production, the silicon doesn't really cost anything," said Burdett. "The big cost is in the assembly and manufacturing, because this requires new processes."

The chip can interface to sensors for an electrocardiogram; a three-axis accelerometer; or blood-glucose, pH-level and pressure monitors. It can measure from only one sensor at a time, but can switch among three sensors.

Hitachi's Life Thermascope devices could be consumer products. The project uses a more off-the-shelf design, integrated into a wristwatch or badge that records the user's temperature and a set of daily evaluations of the person's mental, physical and social states.

Field trials with 200 users showed how even a single sensor could help track nuanced patterns in daily life, Hitachi engineers said. The monitor is packed in a 30cm3 module that uses a 32bit H8S processor operating on a Zigbee network.

University of Ulm artificial retina prototype packs 1,600 pixels in an implantable array.

Silicon eye
Albrecht Rothermel, a professor at the University of Ulm in Germany, is working on a chip that could become one of the first commercial artificial retinas. The university worked with Retina Implant AG on the 1,600-pixel, 3mm x 3.5mm array. The device is a follow-on design from work on a 1,450-pixel array at the Institute for Microelectronics in Stuttgart. The CMOS imager with a 170dB dynamic range was implanted in a handful of patients as part of a hospital experiment lasting a few weeks.

The retina was made in a 0.8?m technology and machined to a 20?m thickness. It uses a broad voltage swing for retina stimulation, new power supply architecture and a digital controller to address pixels sequentially. It lets some blind patients perceive reflected light, Rothermel said.

"We hope this next chip will help people distinguish forms, but we don't know how a real retina will perceive the information yet," said Rothermel. "We also think there could be a learning process" for a blind person regaining sight, he added.

Researchers from Medtronic Inc. described a prototype chip for recording deep-brain signals. The 0.8?m chopper amplifier consumes just 8?W from a 2V supply and measures 5mm2.

The company already makes a deep-brain stimulator to mitigate the symptoms of Parkinson's disease and epilepsy. The new device is part of an effort to add a closed-loop capability for the systems to record, process and respond more flexibly to brain signals.

"Just getting one stimulating electrode approved for implanting in the brain takes years and years," said Reid Harrison, an associate professor at the University of Utah. "Now that their device has been OK'd, it makes sense for them to see what else they can do with it, such as recording brain signals."

Researchers are still finding new kinds of signals and ways to measure them. The Medtronic chip goes beyond the traditional tracking of signal spikes to record bandpower fluctuations. It also measures not only alpha, beta and gamma waves but also emerging phenomena at 500Hz.

"Researchers are finding very fast ripples in the hippocampus," said Tim Denison, a senior principal IC design engineer in Medtronic's neural division. "These frequencies don't show up in surface measurements, but once you dive deep into the brain you get access to these interesting biomarkers. This is an area of fruitful research yet to come, because we don't know all the signals to look at."

The artificial retina prototype comprises an implantable chip and a controller worn behind the ear.

An off-the-shelf microprocessor in the design helps conduct a spectrum sweep that might pick up new waveforms. Engineers also added new filters and gain control mechanisms to compensate for varying noise levels.

"When you are trying to tap into different people's brains with different noise conditions, you can really throw off your algorithm," said Denison.

Researchers must also strike a balance on where they take measurements. Traditional electroencephalographs struggle to resolve 2?V to 3?V signals from the surface of the head, often distorted by noise from a patient's movements. Probing near a nerve cell can tap into stronger, 100?V signals, but at a cost.

"The entire brain and spinal column are shrouded against infection by a thin membrane called the dura," said Harrison. "This is like nature's holy of holies. Breaking through this protective barrier adds a lot to surgical risks."

A Medtronic engineer is also working on building an artificial pancreas. Medtronic already provides an implanted insulin pump that's activated manually, but the new device would automatically check blood-sugar levels and provide insulin as needed.

"We're working on a new algorithm, and we are confident this is the one we will put our chips on," said senior research manager Barry Keenan.

Keenan discussed ways of using redundant sensors with adaptive filters and algorithms that can compensate for hardware error rates of up to 30 percent.

"We have large-scale trials this year to demonstrate this fail-safe system so we can start unsupervised studies," Keenan said. "We have to show these systems are 100 percent effective to go into an FDA submission."

Better test gear
A Harvard team is working on a module the size of a small paperback that could drive a nuclear magnetic-resonance-imaging system. At its heart is a 1.9mm x 2mm chip that can drive a system 60x more sensitive, 60x lighter and 40x smaller than conventional equipment, which can weigh 117.9kg and cost as much as $70,000.

The increased sensitivity means doctors will be able to detect pathogens at an earlier stage of a disease, said Harvard's Nan Sun. "The integration level of this device is higher than anything reported to date," Sun said.

For his part, Bruce Rae, a researcher at the University of Edinburgh, Scotland, has a device that handles photonic analysis of molecules in silicon. It aims to replace large, expensive DNA testers that use laser sources, optics and filters to do that job today. The 4 x 16 micro-LED array could supplant equipment the size of a large printer that can cost as much as $200,000, including the separate PC to which it is connected. By cutting the size and cost of the system by more than half, the 350nm device could power a box that could be used in a doctor's office rather than a distant lab, Rae said.

Separately, Refet Yazicioglu of IMEC has an ASIC that could shrink the electronics of an EEG system down to a module about 1cm3. By replacing the bulky, halter-worn boxes used today, the eight-channel chip would be easier for patients to wear and would likely collect better data. "The presence of these devices with many wires is disruptive and puts patients in an unnatural situation, which impacts the effectiveness of the tests," said Yazicioglu.

- Rick Merrit
EE Times

- Nicolas Mokhoff contributed to this report.





Article Comments - ICs ready for medical practice
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top