Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Power/Alternative Energy
?
?
Power/Alternative Energy??

CAT3612EVAL1 evaluation board for CAT3612 camera flash LED driver

Posted: 12 May 2008 ?? ?Print Version ?Bookmark and Share

Keywords:CAT3612 application note? camera flash? LED driver?

This document by Denisa Stefan and Cornel Rotaru, applications engineers with Catalyst Semiconductor, describes the CAT3612EVAL1 evaluation/demonstration board for Catalyst's CAT3612, a 300mA flash LED driver with 1-wire interface. The functionality and major parameters of the CAT3612 can be evaluated with the CAT3612EVAL1 board. The CAT3612 is a 2-channel charge pump that has been designed to provide a regulated output current up to 150mA per channel. The device is operating in either 1x (LDO) mode, or 1.5x mode and it is suitable for driving with high efficiency one or two flash LEDs. The programmable current and dimming control of LEDs are achieved using a 1-wire interface. The user can set the current from 150mA down to 0mA with approximately 5mA resolution, by toggling the EN/DIM input. Detailed description and electrical characteristics are in the CAT3612 data sheet.

View the PDF document for more information.





Article Comments - CAT3612EVAL1 evaluation board for CA...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top