Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > T&M
?
?
T&M??

BER reference design rolls for 100G Ethernet testing

Posted: 22 Jan 2009 ?? ?Print Version ?Bookmark and Share

Keywords:BER reference design? bit error ratio? Ethernet?

Inphi Corp. launched a 28G Bit Error Ratio (BER) Receiver reference design for R&D or production testing of emerging high speed protocols from 13Gbit/s to 28Gbit/s, including 100Gbit Ethernet, 40G differential quadrate phase shift keying (DQPSK), 14G Fibre Channel, and 100G dual-polarization QPSK (DP-QPSK). The reference design helps to accelerate time-to-market for test and measurement vendors designing next generation 28G test platforms.

For high speed data links, BER testing (BERT) sis the most fundamental test at the PHY, as it measures whether the data bits are correctly transmitted across the link. BERT systems for speeds up to 12.5Gbit/s are well established. However, with the emergence of networking standards such as 40G SONET, 100G Ethernet and 14G Fibre Channel, design and test engineers require BERTs with high speed front-ends above 12.5Gbit/s and up to 28Gbit/s.

The Inphi 28G BER Receiver reference design addresses the challenge of designing a high speed front-end at 28Gbit/s, and integrates an Inphi chipset in a high performance and reliable design. The reference design, together with a 12.5G BERT and a 28G high speed test pattern generator, comprise a complete 28Gbit/s test solution. For test applications requiring clock recovery, the 28G BER Receiver reference design provides a buffered copy of the high speed input data stream, which can be supplied to an optional clock recovery unit to generate a recovered clock. The 28G BER Receiver reference design is based on an Inphi chipset of a 5081DX 50Gbit/s 1:4 demux, 25717CF 25Gbit/s 1:2 fanout, and 20709SE 20Gbit/s 2:1 selector.

"Inphi's 28G BER Receiver reference design is a simple and cost-effective tool for the development and testing of emerging higher speed interfaces," said Mark Donovan, VP of optical assemblies for Finisar Corp. "This reference design enables us to improve our test capabilities while leveraging existing investments in 12.5G BERT systems and software."

The Inphi 28G BER Receiver reference design is available immediately as a reference board for evaluation.





Article Comments - BER reference design rolls for 100G ...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top