Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Embedded
?
?
Embedded??

400MHz ARM9-based MPUs support DDR2

Posted: 03 Aug 2009 ?? ?Print Version ?Bookmark and Share

Keywords:microprocessor? MPU? DDR2? processor?

SAM9G45 MPU

Atmel Corp. has unveiled the first member of a series of 400MHz ARM926 embedded microprocessors that support second generation DDR2 and are optimized for industrial applications such as building automation, data loggers, point-of-sale terminals, alarm systems and medical equipment.

Peripherals include EHCI-compliant high-speed USB with on-chip PHY, dual EBI, 10/100 Ethernet MAC, LCD and touchscreen controller, programmable 1.8- or 3.3V I/O supply voltage, and a high data bandwidth architecture.

Jacko Wilbrink, Atmel's director of ARM products explained, "The vast majority of ARM9-based embedded MPUs support only SDRAM memories. The problem is that memory availability is driven by the high-volume PC market and SDRAM is basically obsolete for current generation PCs. DDR2 and DDR3 offer higher memory densities, higher performance, lower cost and lower power consumption than SDRAM. That's where the market is going. In response to the current economic crisis, many memory vendors are literally shutting down their SDRAM fabs. We expect the supply of SDRAM to dwindle in the foreseeable future. This poses a problem for our customers."

"While the minimum external bus of 300MHz required for DDR3 is far too high for the majority of embedded MPUs," Wilbrink continued. "DDR2 is a good option for designers. We believe that DDR2 is predestined to become the memory of choice for the industrial embedded market, which is why Atmel is aggressively integrating DDR2 support in its ARM9-based MPUs. Our customers now can migrate their next designs from SDRAM to DDR2, with the AT91SAM9G45 and additional forthcoming DDR2-enabled MPUs."

Most ARM9-based MPUs were originally developed for the mobile phone market with a 1.8V supply voltage. In order to be used in industry applications, which typically run at 3.3V, they require external power management ICs and level shifters. The SAM9G45 offers integrated power management, slew rate control I/Os with programmable 1.8- or 3.3V voltage levels, in a 0.8mm ball pitch package to simplify industrial control design and reduce cost.

With a processor clock running at 400MHz, twin parallel External Bus Interfaces (EBI) supporting DDR2 DRAM at 133MHz and integrating high-speed (480Mbit/s) EHCI-compliant USB host and device ports with on-chip transceivers, Ethernet MAC, as well as two interfaces for MMC 4.3 and SDIO/SDCard 2.0, together with an LCD controller with resistive touch screen interface CMOS camera and audio, the SAM9G45 is the suitable platform for embedded applications, that demand high-bandwidth communications, high-density data storage and modern graphical user interfaces.

The 12-layer system bus matrix is linked to the memory management unit of the processor core, as well as eight central DMA channels, six high-speed DMAs each dedicated to the video decoder, LCD controller, USB host and device, Ethernet MAC, and image sensor Interface, 21 Peripheral DMA channels, dual EBI and small blocks of on chip distributed SRAM to ensure uninterrupted internal and external data flows with minimum processor overhead. The high data speedway architecture enables the SAM9G45 to perform 100Mbit/s+ data transfers, user interface rendering in parallel with computationally intensive data processing.

At 400MHz and a 1V core supply, typical power consumption is less than 300?W/MHz. In backup mode with the RTC and a timer running plus four 32bit registers, the SAM9G45 consumes around 8?A.

Data rates of even tens of Mbps are not high enough to provide the ever increasing sizes of log files and the growing sophistication of user interfaces. The 480Mbit/s high-speed USB on the AT91SAM9G45 provides a well-understood, easy-to-use vehicle to handle large amounts of data and interconnection both between systems and between the PCBs inside a system. The SAM9G45 USB host is fully compliant to the EHCI and OHCI standards that guarantee straight forward porting of proven USB host drivers to the AT91SAM9G45.

The SAM9G45 is fully supported by industry-leading suppliers of development tools, OS and protocol stacks, including Linux distributions, Windows Embedded CE, Mentor Graphics, Fluffy Spider Technology, QNX, Micrium, IAR, Keil, Segger, Adeneo and TimeSys.

Samples of the SAM9G45 are available now. Production is scheduled for Q4 09, priced at $8.60 in quantities of 10K units, under the order code AT91SAM9G45-CU.

- Paul Buckley
Power Management DesignLine Europe





Article Comments - 400MHz ARM9-based MPUs support DDR2
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top