Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Processors/DSPs
?
?
Processors/DSPs??

Take a peek inside Apple's A4 processor

Posted: 14 May 2010 ?? ?Print Version ?Bookmark and Share

Keywords:processor? Apple A4? CPU? iPad?

While process node identification is a rather simple task, identifying foundry or manufacturer of a semiconductor product is often very challenging. Continued coverage of major foundries for multiple process node generations becomes a key to success. We compared features of the A4 such as die edge seals, passivation, and dielectrics against known signatures from a broad range of manufacturers.

We have seen consistent matching between the two 45nm processors from the third generation iPod Touch and the iPad, allowing us to confidently identify Samsung as the foundry of the A4 processor.

Establishing the foundry and process node is an important first step. It allows us to bring knowledge about process characteristics and standard cell libraries to bear when determining how innovative design may have contributed to performance and power consumption.

iPad power analysis
With a 25W-hr battery, the Apple iPad touts 10+ hours of battery life. This is an important product differentiator and invites investigation. Of particular interest is how much power the A4 processor consumes, since Apple's acquisition of both Intrinsity and PA Semi had the potential to improve processor performance and power consumption.

By performing functional tests and measuring power consumption, we were able to find out more about the power consumption characteristics of the iPad. As shown in Figure 2, excerpted from our full product teardown, the LCD module consumes around 1W to 3.5W depending on the brightness of the panel. Web browsing, which is one of typical usages of the iPad, dissipates a little over 2W when run at a moderate level of screen brightness.

App processor comparison

Combining the results and cross referencing numbers, the main board was found to consume about 1W of power. Assuming that 50 to 80 percent of the main board power consumption is due to the A4 processor, we concluded that the power consumption of the A4 would be between 500mW and 800mW during Web browsing when using Wi-Fi connectivity.

Figure 2: iPad power measurements (Click on image to enlarge.)

For operations such as playing music or video, the iPad consumes 1.5W ~ 1.7W when the LCD is set to minimum brightness. After removing the contribution of the LCD power, main board power consumption would be 450mW ~ 650mW during this activity. Again assigning a 50-80 percent usage to the CPU, the A4 power consumption is estimated to be 250mW ~ 520mW.

Overall the numbers reflect an efficient CPU design, consistent with the specifications published on similar ARM-based devices with advanced process nodes and some innovation in critical path optimization. Apple is the first to market with a production device in this class, however.


?First Page?Previous Page 1???2???3?Next Page?Last Page



Article Comments - Take a peek inside Apple's A4 proces...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top