Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

Downconverting mixer delivers high linearity, low noise

Posted: 08 Jun 2010 ?? ?Print Version ?Bookmark and Share

Keywords:mixer? 3G? base station? W-CDMA? downconverter?

FPDK12SR8003PSS

Maxim Integrated Products has released the MAX19994A, a fully integrated, 1200MHz to 2000MHz, dual downconverting mixer with an on-chip LO switch, buffer and splitter.

Designed using Maxim's proprietary monolithic SiGe BiCMOS process, this device delivers an combination of linearity, noise performance and component integration. A single IC provides two independent downconversion channels, each with a +25dBm (typ) IIP3, 8.4dB (typ) conversion gain, and 9.8dB (typ) noise figure.

Additionally, the MAX19994A offers an 2LO-2RF spurious rejection of 68dBc for an RF level of -10dBm, and 63dBc for a level of -5dBm. This mixer is designed specifically for 2.5/3G/4G wireless-infrastructure applications in which high linearity and a low noise figure are critical for enhanced receiver sensitivity and blocker immunity. The MAX19994A supports high-side LO injection architectures for 1200MHz to 1700MHz W-CDMA/LTE base stations; it can also be configured for 1700MHz to 2000MHz GSM/Edge, W-CDMA/LTE, TD-SCDMA, and cdma2000 low-side injection architectures.

As a complete SiGe downconverter, the MAX19994A integrates two mixer cores; four amplifiers; three baluns; an LO switch, buffer, and splitter; and dozens of discrete components. The device's 8.4dB conversion gain enables the elimination of a complete IF amplifier stage within the receiver lineup. The MAX19994A's outstanding 2LO-2RF and 2RF-2LO performance can also ease the filtering requirements of close-in harmonics, thus leading to simpler and more cost-effective filter designs. Through this combination of integration and performance, the device reduces mixer solution size by a factor of 2x and the discrete part count by 45 percent.

The MAX19994A is packaged in a compact, 6mm x 6mm, 36-pin TQFN that is pin compatible with the MAX9985/MAX9995/MAX19985A/ MAX19993/MAX19995/MAX19995A series of 700MHz to 2200MHz dual mixers, and pin similar to the MAX19997A/MAX19999 series of 1850MHz to 4000MHz dual mixers. This complete family of downconverters is designed for applications in which a common PCB layout is used for multiple frequency bands. Prices start at $9.96 (1,000-up, FOB USA).





Article Comments - Downconverting mixer delivers high l...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top