Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > EDA/IP
?
?
EDA/IP??

Host controller IP gets USB-IF certification

Posted: 11 May 2011 ?? ?Print Version ?Bookmark and Share

Keywords:controller IP? USB certification? USB Implementers Forum?

Synopsys Inc. announced that its DesignWare SuperSpeed USB 3.0 xHCI (Extensible Host Controller Interface) IP has successfully passed the USB Implementers Forum (USB-IF) SuperSpeed USB certification.

The xHCI specification provides a standardized method for SuperSpeed USB (USB 3.0) host controllers to communicate with the USB 3.0 software stack. To achieve certification, the IP must support the new U1 and U2 power modes as well as all four USB transfer speeds, including SuperSpeed (5.0Gbps), Hi-Speed (480Mbps), Full-Speed (12Mbps) and Low-Speed USB (1.5Mbps). Synopsys claims to be the only USB IP provider with both certified SuperSpeed USB 3.0 Host and Device IP. The complete DesignWare SuperSpeed USB 3.0 IP solution offers a unified architecture, enabling designers to significantly lower integration risk by eliminating the requirement to manage two distinct USB 2.0 and USB 3.0 datapaths in their SoC designs. Optimized for small area and low-power, the DesignWare SuperSpeed USB 3.0 Host Controller is already in products that are in mass production. It is ideal for battery-powered, portable devices.

"As a leading developer of USB 3.0 software, it was critical that MCCI partner with Synopsys, a trusted IP provider, for the development of the MCCI USB 3.0 xHCI Datapump Host Stack," said Terry Moore, CEO of MCCI. "Our close collaboration with Synopsys throughout the years has enabled us to create an interoperable USB 3.0 software platform that delivers fast SuperSpeed USB transfer speeds and full legacy support, while taking advantage of power savings from U1 and U2 modes. Whether in an embedded system, on Linux, or as a Windows driver, the MCCI software stack, combined with emulated FPGA hardware, allows developers to focus on system issues early in the development cycle."

The silicon-proven DesignWare SuperSpeed 3.0 USB Device, Host and Dual-Role Device Controllers are available now along with, verification IP, virtual prototype and drivers. The DesignWare SuperSpeed USB 3.0 PHY IP is available in leading 65nanometer (nm) and 130nm process technologies now, with support for 28nm and 40nm process technologies scheduled to be available in the first half of 2011.





Article Comments - Host controller IP gets USB-IF certi...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top