Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > T&M
?
?
T&M??

Comply with receiver test based on PCIe 3.0 CEM specification

Posted: 08 Mar 2012 ?? ?Print Version ?Bookmark and Share

Keywords:PCIe? Card Electromechanical? Serial Enabling Group?

Since the release of the PCIe base specification revision 3.0 (rev. 3.0) in November 2010, many semiconductor vendors have tested their bare ASICs accordingly. Now PCIe 3.0 add-in cards (AICs) and motherboards (MBs) with PCIe 3.0 slots are being developed. These items need to be tested according to the PCIe Card Electromechanical (CEM) Specification, for which the Serial Enabling Group (SEG) is currently generating the PHY Test Specification.

At time of issue of this document neither the CEM Specification (currently version 0.9) nor the PHY Test Specification (currently version 0.5) has been released. This application note represents a snapshot of the status at the time of issuing.

Its intent is to assist card vendors through pre-release testing. As the specifications are not yet final, target values for calibration or the calibra�tion procedure may change. The reader is advised to check the current version of the relevant specification and if it differs from those mentioned above, check for possible changes.

View the PDF document for more information.

Originally published by Agilent Technologies Inc. at www.agilent.com as "How to Pass Receiver Test According to PCI Express3.0 CEM Specification with Add-In Cards and Motherboards".





Article Comments - Comply with receiver test based on P...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top