Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

Using signal analyzer as down converter with scope and VSA software

Posted: 29 May 2012 ?? ?Print Version ?Bookmark and Share

Keywords:oscilloscope? VSA software? signal analyzer?

Many applications in digital communications and radar need demodulation and analysis of wideband signals in the microwave region. Some of these applications can be handled by using a modern wideband oscilloscope, such as the Agilent Infiniium oscilloscopes, to directly digitize the signal for analysis with the Agilent 89600 VSA software. However, many times it is more convenient and economical to use a broadband down converter or tuner to translate the desired microwave signal down to an intermediate or IF frequency prior to digitization with an oscilloscope.

This paper will discuss using the Agilent PXA signal analyzer as a microwave down converter for an Infiniium oscilloscope or Acqiris digitizer running the 89600 VSA software. This method provides the user with the advantages of both a signal/spectrum analyzer and high-resolution vector signal analyzer, as well as a wideband system to address wideband demodulation requirements.

View the PDF document for more information.

Originally published by Agilent Technologies Inc. at www.home.agilent.com as "Using the Agilent PXA Signal Analyzer as a Down Converter with Infiniium Oscilloscopes and 89600 VSA Software".





Article Comments - Using signal analyzer as down conver...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top