Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Interface
?
?
Interface??

NFC interface chip draws power from RF emissions

Posted: 07 Nov 2012 ?? ?Print Version ?Bookmark and Share

Keywords:AS3953? NFIC? NFC? ISO14443A industry standard? EEPROM?

Semiconductor manufacturer AMS has announced the availability of the AS3953 Near Field Communications interface Chip (NFIC). The company's latest NFIC operates on energy harvested from an NFC reader's RF emissions, requiring no external power source and at most one external component.

The device enables system designers to add full bi-directional NFC capability at a total cost less than half that of a typical NFC reader implementation, which can require as many as 20 external components.

The AS3953 is fully compliant with NFC Forum specifications (NFCIP-1 target at 106kbps) and the ISO14443A industry standard (up to 848kbps, to Level 4). This means that it can be used in contactless smart cards and as an NFC Forum-compatible interface tag, and can establish instant communication with any NFC-enabled phone in close proximity (The AS3953 is expected to find uses in a wide variety of applications, including contactless passive programming of MCU-based systems, smart cards with displays, smart retail shelf labels, sensors and ultra-low-power data loggers, medical devices, and secured NFC Bluetooth pairing.

It can also enable innovative new approaches to system designs by using an NFC-enabled smartphone as a display host and system controller for normally stand-alone devices, eliminating the requirement for the slave device to have its own display and processor.

The AS3953 features a configurable wake-up interrupt, enabling a zero-power system design while in shut down. It also contains a complete analogue front end, 1kB of internal EEPROM, and a 4-wire SPI with a 32B FIFO. The device can draw up to 5mA of harvested energy from the external magnetic field, and includes an internal power management circuit that can supply harvested energy to the application. This makes the AS3953 suitable for use with battery-powered and portable microcontroller-based devices. The AS3953 NFiC comes as a bare die or in a 10-pin, 3x3mm MLPD package.

- Julien Happich
??EE Times





Article Comments - NFC interface chip draws power from ...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top