Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Sensors/MEMS
?
?
Sensors/MEMS??

Printed electronics enables flexible sensor design

Posted: 06 Aug 2013 ?? ?Print Version ?Bookmark and Share

Keywords:printed electronics? sensing? CMOS? sensors? flexible interconnections?

Compared to traditional electronic solutions, printed electronics offers several differentiating factors which make them particularly well suited to sensing application. Most printing processes are compatible with large area substrates, which enable the design of large area sensors with sensing capabilities across surfaces of up to 500x500mm. This at a very competitive cost per area ratio (compared to amorphous silicon or CMOS technologies).

Isorg addresses several markets and functionalities. This includes scanning surfaces for X-ray digital imaging with the co-integration of organic photodiodes with transistors on amorphous silicon, photodiodes combined with organic transistors on plastic substrate.

Figure 1: Plastic image sensor prototype (Isorg / Plastic Logic).

Figure 2: Printed temperature sensor.

In the future, substituting amorphous silicon technology with organic electronics will increase cost competitiveness and enable new products developments (for lighter and more robust portable equipment). The first demonstrator of such a full organic image sensor is being fabricated as a collaborative development between Isorg and Plastic Logic. More particularly, the collaboration focuses on the deposition of organic printed photodetectors onto a plastic organic thin-film transistor backplane, to create a flexible sensor with a 40x40mm active area, 375um pitch (175um pixel size with 200um spacing) and a 94x95 = 8 930 pixel resolution (figure 1).

1???2?Next Page?Last Page



Article Comments - Printed electronics enables flexible...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top