Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > EDA/IP
?
?
EDA/IP??

Freescale outdoes competitors in MCU specs

Posted: 25 Feb 2015 ?? ?Print Version ?Bookmark and Share

Keywords:typ? MCU? Kinetis?

Editor's Note: Jack Ganssle discusses how Freescale surpasses other vendors in delivering MCU specifications to their customers by providing clear and precise values.

One of my pet peeves is when a datasheet lists 'typical' values with no min or max. I've written about this a couple of times: here and here. It seems like this problem is getting worse as components get more complex. In fact, one FAE admitted that "typical" specs are often driven by marketing's needs, not engineering analysis.

Sometimes the results are almost laughable. TI, which generally does a good job of characterising their devices, has a step-down converter (the TPS82740A) whose Iq is rated at 360nA typ, 2300 max. That's a huge range of values. One can only conclude that the typ number is meaningless. (Not to knock the partthis is a very innovative converter. It will stop switching and connect Vin to Vout through a FET if Vin is roughly at the desired output level. Very cool.)

Maximum values are especially rare in the domain of ultra-low power MCUs. Vendors are in a real slugfest to prove their parts have lower sleep currents than the competitors, and too often "typ" is the only rating given for this critical parameter. Here's a "typical" example from a vendor of an ARM MCU who makes a big production about their low-current specs:

ARM MCU

The careful designer is left scratching his head, with no idea what sort of results he'll see in a real-world application.

Hats off to Freescale. Perusing the datasheet for their KL02 Cortex M0+ MCU I came across the following statement:

"The maximum values stated in the following table represent characterised results equivalent to the mean plus three times the standard deviation (mean + 3 sigma)."

Wow! A year or so ago I asked several semi-vendors what 'typical' means and none could define it. Here's a concise mathematical model that makes a lot of sense. Three sigma means you can be sure 99.7 per cent of the parts will not exceed the listed values. 'Typical' still is not defined, but cautious engineers really only care about max values.

A portion of the table that the three sigma rating applies to follows:

Datasheet

It's interesting that typ and max are generally pretty close together. If typ is the meanwhich is only a guessthen the standard deviation they experience is pretty tiny. They have extremely good control of their manufacturing process.

Other members of their Kinetis family are well characterised as well. Some, like the KL03, sip very gently from the power supply in deep sleep modes.

It's tempting to advertise the best possible numbers for important specs, and 'typical' results are a lot more compelling than worst-case values. But these are aspirations, not guarantees, and we engineers can't design to some marketing person's fantasy. I hope more companies follow suit.

- Jack Ganssle
??Embedded





Article Comments - Freescale outdoes competitors in MCU...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top