Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Interface

Conec offers RJ45 magnetic modular jacks

Posted: 19 Jun 2002 ?? ?Print Version ?Bookmark and Share

Keywords:rj45 mm jack? ethernet jack? lan connector? man connector? ethernet connector?

Designed for use in telecommunication and LAN/WAN networks, the RJ45-MM-Jack connectors from Conec Corp. feature a four-core construction that consists of an isolation transformer and common-mode chokes. A 5-core configuration is also available, which as adds a shunt choke in the transmission channel.

Available in single-, dual-, four-, six-, and eight-port models, the connectors integrate one 10/100Base-Tx magnetic module at each port with four 75-ohm resistors connected to both smith termination and the transformer's center tap. The connectors are also available in through-hole and surface-mount versions.

The connectors comply with the IEEE 802.3 and ANSI X3.263 standards and include a minimum 3505H OCL with 8mA dc bias, as well as 1.5kVrms isolation. The connector's housing can also accommodate LEDs.

Article Comments - Conec offers RJ45 magnetic modular j...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top