RFC bulkhead connector operates to 11GHz

The RFS-2030 N female bulkhead connector from RF Connectors is designed for use in board to panel feed-through OEM applications with a frequency range from 0Hz to 11GHz and has a maximum voltage rating of 1.5kV.

The PCB-mount device has a nickel-plated, machined brass body with Teflon insulation and silver-plated phosphor bronze contact. The bulkhead seal is an inset GR70 nitrile o-ring. The connector is supplied with a hex nut and lock washer, and is mounted on four posts with standoffs spaced 10.18mm on center.

Insulation resistance is 5 gigaohms, while the dielectric withstand voltage is 2.5kVrms (sea level) and the RF high potential withstand voltage is 1.5kVrms (sea level, 5MHz). It is screened for operation over the -650C to 1650C temperature range.