Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

ADI triple differential drives down cost

Posted: 04 Aug 2004 ?? ?Print Version ?Bookmark and Share

Keywords:analog devices? adi? ad8133? triple differential line driver?

Fully integrated into a single, 4-by-4mm package, Analog Devices Inc.'s (ADI's) AD8133 is the industry's smallest triple differential line driver. With the new device, engineers needing to drive RGB (red-green-blue) signals over a twisted-pair cable can eliminate multiple-chip solutions, cutting costs by up to 50 percent and reducing board space by up to 75 percent.

The AD8133 is a major advancement beyond using discrete op amps for driving differential RGB video signals over twisted-pair cable for computer peripheral, remote display, and KVM (keyboard-video-mouse) applications. Most critical to these applications is minimizing radiated EMI.

The product's internal common-mode feedback provides an output gain and phase balance of -60dB at 50MHz, suppressing EMI radiation and enabling the use of Cat.5 unshielded twisted-pair (UTP) cable. Many applications benefit from the cost-savings of twisted-pair configurations over coaxial cable solutions.

The AD8133 driver accepts single-ended inputs and provides differential outputs; each amplifier has a fixed gain of 2 to compensate for the attenuation of line termination resistors. The AD8133 is specifically designed for RGB signals, but can be used for any type of analog signals or high-speed data transmission. The device is capable of driving either Cat-5 UTP cable or differential printed circuit board transmission lines with minimal signal degradation.

The outputs of the AD8133 can be set to a low voltage state for use with series diodes in line isolation applications, allowing easy differential multiplexing over the same twisted pair cable. The AD8133 driver can be used in conjunction with the AD8129 and AD8130 differential receivers.

Manufactured on ADI's next-generation XFCB bipolar process, the AD8133 has a 225MHz large signal bandwidth and 1,600V/?s slew rate. The output common-mode (Vocm) level is easily adjustable by applying a voltage to the Vocm input pin. The Vocm can also be used to transmit signals on the output common-mode voltages.

The AD8133 is priced at $2.59 per unit in 1,000-piece quantities and is available in full production. It operates over the industrial temperature range of -40C to 85C, and is currently available in 24-pin LFCSP (lead frame chip scale packaging).

- Paul O'Shea

eeProductCenter





Article Comments - ADI triple differential drives down ...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top