Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Amplifiers/Converters
?
?
Amplifiers/Converters??

TI rolls out 'complete front-end solution' for bridge sensor apps

Posted: 04 Nov 2005 ?? ?Print Version ?Bookmark and Share

Keywords:texas instruments? ti? analog-to-digital converter? adc? ads1232?

Texas Instruments Inc. (TI) announced a pair of 24-bit analog-to-digital converters (ADCs) which integrate a low-noise programmable gain amplifier (PGA), precision delta-sigma ADC and internal oscillator.

Fabricated using the company's high-performance, precision mixed-signal CMOS technology, the ADS1232 and ads1234 promise to provide a complete front-end solution for bridge sensor applications, including weigh scales, strain gauges and pressure sensors.

"The ADS1232 and ADS1234 combine unmatched performance and functionality in a small package to deliver an easy-to-use, very low-noise front-end for direct interface to bridge sensors," said David Russell, strategic marketing engineer for TI's oversampling data converter products.

The input multiplexer accepts either two (ADS1232) or four (ADS1234) differential inputs. The ADS1232 also includes an onboard temperature sensor to monitor ambient temperature. Following the multiplexer, the low-noise PGA features RMS noise of 17nV (at 10SPS data rate) or 44nV (at 80SPS data rate) and has a selectable gain of 1, 2, 64 or 128, supporting a full-scale differential input of 2.5V, 1.25V, 39mV or 19.5mV. The PGA drives the high-resolution, delta-sigma ADC with 23.5 bits of RMS noise performance.

The ADS1232 and ADS1234 were designed for ease of use. Dedicated I/O pins for setting gain, data rate and input channel (no on-chip digital registers to program) simplify control. Either the internal, low-drift oscillator, external crystal or external oscillator can provide the clocking. Data is output over an easily-isolated, two-wire interface that connects directly to TI's MSP430 and other microcontrollers. When not in use, the ADS1232 and ADS1234 can be put in a low-power standby mode, or shut down completely.

The RoHS-compatible devices are already available from TI and its authorized distributors. The ADS1232 is packaged in a TSSOP-24 and is priced from $3.90, and the ADS1234 is packaged in a TSSOP-28 and is priced from $4.50, both in 1,000-piece quantities. Evaluation modules are also available.



Article Comments - TI rolls out 'complete front-end sol...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top