Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Networks
?
?
Networks??

Right-angle connectors enable SAS HDD connections

Posted: 21 Feb 2006 ?? ?Print Version ?Bookmark and Share

Keywords:Gina Roos? FCI? receptacle connector? Serial Attached SCSI? SAS?

FCI has developed 29-position, right-angle receptacle connectors for attaching Serial Attached SCSI (SAS) hard disk drives (HDDs) to processor blades, storage blades, mezzanine cards or embedded system boards in data, communications and industrial equipment.

Available in through-hole solder or surface-mount terminations, the high-speed, serial interface is designed to support differential signalling, initially at speeds of 3Gbps. The SAS receptacle accepts either SAS or SATA (Serial ATA) drives, giving the system manufacturers the option of deploying cost-effective SATA drives or higher performance SAS drives for mission-critical applications.

The raised receptacle openings are offset from the top surface of the carrier board to provide clearance for components that are mounted beneath the installed hard drive. Nominally 4.7mm clearance is provided under a 2.5-inch hard drive. The right-angle connectors also feature stamped retention clips that provide additional mechanical strength and stability after soldering. The right-angle SAS receptacle connectors are RoHS compatible.

Typical pricing ranges from $1 to $2 each in quantities of 1,000, depending on the connector configuration. Samples are available with production lead times from stock to four weeks.

- Gina Roos
eeProductCenter




Article Comments - Right-angle connectors enable SAS HD...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top