Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > EDA/IP
?
?
EDA/IP??

Reference design targets PoE powered devices

Posted: 01 Jun 2006 ?? ?Print Version ?Bookmark and Share

Keywords:Power Integrations? DAK-86? reference design? PoE?

Power Integrations Inc. has introduced the DAK-86, a new reference design kit for PoE powered devices (PD).

According to the company, the rapid growth of the PoE PD marketreportedly expanding at a compounded annual growth rate of almost 36 percentis driven by the wide adoption of network appliances, wireless LANs and VoIP telephones. PI said it has addressed the needs of this high-growth market by providing a reference design to help speed prototyping and delivery of standards-compliant PoE PDs.

The reference design combines a multi-class PoE interface and DC/DC switching circuit built around the company's monolithic DPA-Switch family of ICs. It supports the design of all current classes of PoE PDs (Class 0 to Class 3) and a power range up to 12.95W, said PI. A designer can change the class of a design by replacing a single resistor. The design carries out PoE signature and classification functions, while the integrated DPA-Switch device manages all the primary DC/DC switching and control functions. The complete circuit requires only 16 components and costs about one-third less than designs based on integrated PoE interface/controller ICs, the company said.

The PI circuit design was tested by the University of New Hampshire Interoperability Consortium using a comprehensive suite of power sending equipment, and was shown to meet IEEE 802.3af requirements in all cases.

"Our new PoE reference design kit offers an excellent solution for reducing time-to-market of PoE PDs," said Andrew Smith, DC/DC product marketing manager for Power Integrations. "The circuit design is fully compliant with the IEEE 802.3af standard for PoE PDs, and early adopters are finding that it offers a highly effective, low-cost solution to jumpstart their network appliance designs."

The new reference design kit is available at $100. The design kit contains a 3.3V, 2A Class 2 power supply, samples of the DPA-Switch family and design software, plus a comprehensive engineering report including circuit description and schematic, test results and transformer design information.




Article Comments - Reference design targets PoE powered...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top