Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > T&M
?
?
T&M??

DSP DAQ systems read piezoelectric signals

Posted: 21 Jun 2006 ?? ?Print Version ?Bookmark and Share

Keywords:Data Translation? DT9841-VIB? data acquisition? DAQ? TMS320C6713?

Are you working with low-bandwidth sensors? Need a DAQ system that can be easily expanded to include as many channels as you need? Then check out Data Translation's latest DT9841-VIB systems. They're realtime DSP DAQ boards.

Running 300MHz Texas Instruments TMS320C6713 chips, these systems are capable of accepting simultaneous integrated electronic piezoelectric (IEPE) sensor signals. In use, a DT9841-VIB provides excitation, signal conditioning, and anti-aliasing filtering. As such, these systems can be used for applications requiring piezoelectric accelerometer readings such as automotive test, acoustics, sonar, and rotating machinery.

Ready-to-go boxes
Data Translation's Sleek Box versions ship with 5V at 6A galvanically-isolated power supplies, and power and USB cables. Sleek Boxes make connection to sensors using common RF-type BNC connectors.

DT9841-VIBs are also the latest additions to the company's Fulcrum II Series of DSP DAQ products for 480Mbps USB 2.0.

24bit sigma-delta Conversion
The DT9841-VIB board contains eight simultaneous 24bit sigma-delta analog input channels, with a sampling rate of 100kHz/channel. Significantly, this design is quite scalable. You can connect up to eight such modules if you need a high channel-count application.

Analog and digital outputs
In addition, the board has two 24bit de-glitched waveform analog output channels. These could be used to control a shaker table, for example, and stimulate systems under test. The board also packs 16 digital I/O lines for control and monitoring, and three 32bit counter/timers.

Notably, all subsystems can be run simultaneously and monitored in realtime, with an on-board 32bit floating point processor.

The DT9841-VIB supports a number of software-programmable IEPE functions for each of its eight analog inputs. For example, you can enable a 4mA current source, select either AC or DC coupling, and enable a 2-pole 10kHz Butterworth filter.

You also can choose a memory configuration, including 128Mbytes of SDRAM and 2Mbytes of flash (for autonomous operation).

Software support
Comprehensive host and DSP communication libraries ship with the board. These are compatible with the Texas Instruments Code Composer Studio package, and Microsoft Visual Studio. They provide access to all on-board realtime functions and communication to/from your PC.

What's more, you get Data Translation's Ready-to-Measure example application programs with the unit. These programs can exercise every board function. Additionally, the system is supported by Vibrant Technology's MEscope program for post-processing and analysis of acoustic and vibration test data.

The DT9841-VIB is priced at about $5,700. It's shipping now.

- Alex Mendelsohn
eeProductCenter




Article Comments - DSP DAQ systems read piezoelectric s...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top