Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

Solution tops PWM in series-connected LED control

Posted: 27 Jul 2006 ?? ?Print Version ?Bookmark and Share

Keywords:AnalogicTech? AAT1231? boost DC/DC converter?

AnalogicTech's inductive boost DC/DC converter

Advanced Analogic Technologies Inc. (AnalogicTech) has announced the AAT1231, a high-frequency, high-efficiency inductive boost DC/DC converter for controlling white LEDs in portable systems operating from single-cell Li-ion/polymer batteries. The company said the new product has surpassed the former de facto standard PWM technique to control series-connected LEDs.

Delivering 50mA up to 24V, AnalogicTech said this new device is capable of driving up to six white LEDs in series or up to 12 white LEDs in a parallel/series configuration using the company's digital Simple Serial Control (S2Cwire) single-wire interface. This enables designers to use a single wire to digitally control white LEDs, giving flicker-free light output, reduced MCU clock cycles and saving in GPIO resources.

PWM produces variations in current that affect LED brightness. The control methods required for the old technique also consume microcontroller processing resources, require GPIO interfaces, and demand a large number of additional components. AnalogicTech said AAT1231 addresses all these.

LED output current on the new device is controlled using S2Cwire interface in 16 linear steps. By changing the feedback voltage with the SEL pin, designers can extend the output voltage another 16 levels. This allows them to "set and forget" the output across a total of 26 steps (after overlap) from 7.5 percent to 100 percent. Digital control improves display readability by providing constant flicker-free LED output.

According to AnalogicTech, the device's 2MHz switching frequency provides fast response to load transients and permits the use of small external components including a 2.2H inductor. It promises an overall efficiency up to 82 percent. The device also adds a true load disconnect feature that completely isolates the load from the power source. By reducing leakage current to less than 1A, the company said this function extends battery life and system standby time.

The AAT1231 also offers a wide variety of standard protection features, including integrated soft-start, current limit, over-temperature and over-voltage protection. Specified over the -40C to 85C temperature range, the device is immediately available in a Pb-free, 12-pin TSOPJW package.




Article Comments - Solution tops PWM in series-connecte...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top