Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

Startup pushes 10Gbps signals 1.5m

Posted: 15 Nov 2006 ?? ?Print Version ?Bookmark and Share

Keywords:Banpil Photonics? 10Gbps? Rick Merritt?

Startup Banpil Photonics Inc. claimed it has demonstrated a way to send 10Gbps signals 1.5m across a standard pc-board without using power-hogging techniques to amplify the signal. The demo included sending 20Gbps signals one meter between chips.

"This is a significant breakthrough, because it is a purely electrical solution requiring significantly less power to drive the signal over long interconnects," said Dr. Achyut Dutta, chief executive of Banpil.

Both demos included pushing the signals over two connectors. Most demos at these data rates are limited to a few inches in length and typically use signal pre-emphasis and equalization techniques that can draw an additional 30-40 percent power.

Banpil's method "is completely passive. It uses no equalization or pre-emphasis and its independent of the transmit and receive chips," said Dutta.

The company is working with one unnamed PCB maker to deliver pilot products in 2007 and commercial products in the first half of 2008.

The approach uses standard FR4 board materials and processes; however it does require a novel design tool chain. Banpil has created a unique RF simulation, layout and modeling tool chain based on two tools from unnamed EDA vendors and a tool designed in house.

"To let others do these designs, we will need to get a Cadence or Mentor to make these tools," said Dutta, who has started talks with two unnamed companies about creating such tools. Current design tools are limited to developing interconnects that run at less than 5Gbps, he added. Part of the company's unique approach is that it treats high-speed signals as radio waves.

"This is completely RF. All electrical signals are RF signals, really," Dutta said. "Our techniques could be implemented within a chip, but right now we are just looking at chip-to-chip links.

Although Banpil is not disclosing its technology, a February patent application Dutta submitted to the U.S. Patent and Trademark Office provides some hints. The pending patent describes a method for creating an open trench or slot as part of a single- or multi-layer dielectric system to reduce microwave signal loss.

A "large portion of the signal (electromagnetic wave) is allowed to pass through the air or dielectric material having the dielectric loss less than the base dielectric material itself," the application states.

"The trench or back-slot of the dielectric system can be filled with air or kept in vacuum. Alternatively the trench can be filled with the liquid crystal material, which can tune the dielectric constant and loss...(or) with the coolant to cool the PCB," said the patent application. "The backside trenchcan be opened by the laser drilling, mechanical drilling, wet-etching, or dry-etching techniques," the document added.

- Rick Merritt
EE Times




Article Comments - Startup pushes 10Gbps signals 1.5m
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top