Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

RS-485 transceivers need no control channel

Posted: 28 Mar 2007 ?? ?Print Version ?Bookmark and Share

Keywords:transceiver? RS-485 transceivers? half-duplex transceivers?

Maxim Integrated Products has introduced the MAX13487E/MAX13488E half-duplex RS-485 transceivers featuring AutoDirection, which automatically enables the driver when transmitting data. This feature eliminates the driver-enable control signal, thus saving space and reducing component count in isolated metering, automotive and industrial applications.

The MAX13487E offers 15kV ESD protection using the IEC 61000-4-2 air gap discharge method, and both transceivers provide 15kV ESD protection using the human body model. The MAX13487E's slew-rate-limited drivers provide reduced EMI and operation in environments with high levels of radiated noise for error-free transmission up to 500Kbps. The MAX13488E allows data rates up to 16Mbps. Additionally, these devices feature a 1/4-unit load receiver input impedance, allowing up to 128 transceivers on the bus.

The MAX13487E/MAX13488E operates over the extended -40C to 85C temperature range and are available in an industry-standard, 8-pin SO package. Pricing starts at $1.25 (1,000-up, FOB USA).




Article Comments - RS-485 transceivers need no control ...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top