Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > EDA/IP
?
?
EDA/IP??

ATX reference design meets Energy Star specs

Posted: 27 Apr 2007 ?? ?Print Version ?Bookmark and Share

Keywords:ATX reference design? Energy Star requirements? ATX power supplies?

ON Semiconductor has unveiled what it claims is the industry's first open ATX reference design that meets the new Energy Star performance requirements for ATX power supplies used in desktop PCs scheduled to take effect this July.

The new reference design promises efficiency that exceeds the Energy Star requirements under all specified load conditions, and provides a blueprint for power supply manufacturers to bring highly efficient power supplies to market with readily available, cost-effective technology.

50% less power losses
The ATX reference design achieves full-load efficiency of 86.5 percent at high-line and 82.5 percent efficiency at 20 percent of load and low-line. This reduces power losses by approximately 50 percent, compared to the typical power supplies on the market today that average 70-percent power efficiency. The reference design also meets IEC61000-3-2 power factor requirements.

"We worked closely with worldwide regulatory organizations and our customers to develop this cost-effective Energy Star-compliant power supply solution," said Andy Williams, senior VP and general manager of ON Semiconductor's automotive and power regulation group. "ON Semiconductor will continue to introduce additional GreenPoint power solutions addressing the global need for power efficiency in both active and standby modes."

The reference design addresses all functional blocks of the ATX power supply, including power factor correction, switch-mode power supply control and regulation, post regulation and standby power. The design utilizes several of the company's newest power management devices and draws from its leading discrete component portfolio to achieve superior efficiency performance.

ON Semiconductor has a complete documentation package for the ATX reference design, including description, schematics, BOM, Gerber files and evaluation guidelines.

Key products
Key products in the reference design include:

NCP1653: This compact continuous conduction mode (CCM) power factor correction (PFC) controller makes the choice of incorporating a PFC front-end into an ATX design easy, by reducing part count and providing a robust, cost-effective front-end without range switches. Offered in Pb-free 8-lead SOIC and PDIP packages, the NCP1653 is priced at 80 cents in 2,500-unit quantities.

NCP1562 : This active-clamp pulse width modulation (PWM) voltage-mode controller has a 5 percent duty cycle limit with a soft-stop to prevent the typical oscillations in the forward active-clamp topology. The device has a dual-mode overcurrent protection circuit that handles momentary and continuous overcurrent conditions differently. Offered in Pb-free 16-lead TSSOP and SOIC packages, the NCP1562 is priced at $1.60 per unit in 2,500-unit quantities.

NCP1027: This high-voltage switcher includes a power MOSFET together with a startup current source, all directly connected to the bulk capacitor. To prevent lethal runaway in low input voltage conditions, an adjustable brown-out circuitry blocks the activity until sufficient input level is reached. Offered in a Pb-free 8-pin PDIP package, the NCP1027 is priced at 97 cents per unit in 1,000-unit quantities.

NCP4330: This synchronous post-regulator replaces the mag-amp to provide higher efficiency in the output section of the ATX power supply. Offered in a Pb-free 8-pin SOIC package, the NCP4330 is priced at 60 cents per unit in 2,500-unit quantities.

MSR860: This 8A, 600V power rectifier features SWITCHMODE soft recovery. Offered in a Pb-free TO-220 package, the MSR860 is priced at $1.07 per unit in 50-unit quantities.




Article Comments - ATX reference design meets Energy St...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top