Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > EDA/IP
?
?
EDA/IP??

Fujitsu taps Mentor to improve DFM capabilities

Posted: 25 May 2007 ?? ?Print Version ?Bookmark and Share

Keywords:design for manufacturing? EDA tools? IC design? lithography?

Mentor Graphics Corp. announced that Fujitsu Ltd will use Mentor's Calibre LFD to enhance their DFM capabilities for internal product development and for external fabless customers.

Calibre LFD is the first production-proven EDA tool to address the urgent issue of how to manage lithographic process variability in the early stages of design creation. Identification of lithographic hot spots and analysis of how designs are affected by process variations are becoming critical issues for designers at 65nm and below. The Calibre LFD tool allows designers to identify hot spots and other layout topologies that are sensitive to process variations and are primary contributors to systematic failure.

To enable Calibre LFD's lithographic modeling, Fujitsu provides designers with an LFD kit for their 65nm process in the same manner as a design rule checking (DRC) kit. The designer can then run simulations to see an accurate description of how a layout will perform under Fujitsu's specific lithographic process.

The goal is to drive the design to an "LFD clean" as well as a "DRC clean" sign-off. With the Calibre LFD kit in place, it is now possible for internal designers at Fujitsu to verify and improve their designs way ahead of production. It is also possible for Fujitsu fabless customers to create designs and check them with Fujitsu-specific Calibre LFD verification to ensure they are hot-spot free before submitting them to the Fujitsu fabrication process.

"Fujitsu has worked closely with Mentor to create a Calibre LFD kit for our 65nm process to allow our internal design teams, as well as our foundry customers, to explore lithographic sensitivities early in the design process," said Shoji Ichino, general manager, technology development division, electronic devices business group of Fujitsu. "We believe having a highly accurate model that allows us to make critical trade-off decisions before the design is sent to fabrication is a valuable capability for all our customers to ensure high yield and rapid time-to-market."




Article Comments - Fujitsu taps Mentor to improve DFM c...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top