Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Memory/Storage
?
?
Memory/Storage??

Five-function memory card interface fits handhelds

Posted: 06 Nov 2007 ?? ?Print Version ?Bookmark and Share

Keywords:memory cards? card interface? handheld devices?

EMIF06-SD02F3

STMicroelectronics has announced a tiny, highly integrated chip that provides five essential functions required by memory card interfaces in mobile phones, GPS navigation devices, digital cameras and a broad range of other consumer and industrial products that use removable SD protocol cards. Produced using the company's Integrated Passive and Active Devices (IPAD) technology, the new flip-chip EMIF06-SD02F3 memory-card transceiver integrates signal conditioning, bidirectional level shifting, ESD protection, EMI filtering and a 2.9V voltage regulator.

Integration of these circuits into a single monolithic chip increases system reliability and saves more than 75 percent of the board area required by a typical discrete solution. The EMIF06-SD02F3 requires less than 7mm? of board space, compared to approximately 30mm? to provide the same functions with discrete components.

The chip is compliant with standard and high-speed SD formats, and with MiniSD, MMC and ?SD/TransFlash. It provides a high level of ESD protection to exposed external memory card slots, efficient EMI filtering to protect data lines against RF interference, and pull-up and pull-down resistors to prevent floating data lines. ESD protection on the card-side pins meets the stringent IEC61000-4-2 Level 4 standard, 15kV air discharge. The 800MHz to 3GHz EMI filter achieves over 20dB attenuation at 1GHz.

In addition, six high-speed bidirectional level shifters, designed for 50MHz operation and with 3ns typical propagation delay, enable the interfacing of 2.9V memory cards with 1.8V host processors. A maximum channel-to-channel skew of 1.5ns ensures data transmission integrity, and the drivers are optimized for low-power applications with quiescent off-current of 1?A.

Power for the memory card is provided through an on-chip 2.9V LDO CMOS voltage regulator, with 200mA current capability and an input voltage range of 3.1V to 5V. The drop-out voltage is 100mV maximum with a 200mA load. A switch-off control pin, with fast 30?s turn-on time, helps minimize a product's power consumption and extend battery life, and the regulator includes thermal shutdown, undervoltage lockout and shortcircuit protection.

The EMIF06-SD02F3 is available in a Pb-free, 24-bump, 400?m pitch flip-chip, and is currently in volume production. It is priced at $1.10 for quantities up to 1 million units, and $0.95 in quantities of 1 million to 5 million units.




Article Comments - Five-function memory card interface ...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top