Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Embedded
?
?
Embedded??

MicroTCA transceiver platform rolls for WiMAX apps

Posted: 20 Nov 2007 ?? ?Print Version ?Bookmark and Share

Keywords:reference design? MicroTCA? broadband wireless transceiver?

Lime Microsystems' reference design for a MicroTCA broadband wireless transceiver targets femtocell and picocell WiMAX base station applications.

To minimize costs and inventory, the reconfigurable design supports a variety of network configurations, bandwidths and data rates. The transceiver has six user-selectable channel bandwidths from 1.5MHz to 14MHz and can be digitally configured to operate in bands from 2-4GHz.

Using a high level command set, the design can be configured for half-duplex and full-duplex operation in both frequency division multiplex (FDM) and time division multiplex (TDM) modes. The board can also be used as a "plug-and-play" transceiver for rapid evaluation and deployment of WiMAX base stations based upon ACTA or MicroTCA standards.

The zero-IF transceiver uses 12bit baseband ADCs and DACs. A 40MHz sampling rate is derived from a low-noise clock. Its serial RapidIO interface supports a throughput of up to 3.125Gbps and can communicate via any advanced mezzanine cards ports.

A single port carries both I/Q and control traffic and an I/Q record and playback capability simplifies testing. A full speed USB interface is provided for PC controlled standalone operation.

The development platform will be available in December at a one-off price of $12,000.

- Jack Shandle
Wireless Net DesignLine




Article Comments - MicroTCA transceiver platform rolls ...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top