Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

High-speed MOSFET driver supports step-down/-up DC/DCs

Posted: 10 Dec 2007 ?? ?Print Version ?Bookmark and Share

Keywords:MOSFET driver? DC/DC converter? step-down converter?

Linear Technology Corp. has unveiled the LTC4444 a high-speed, high-input supply voltage (100V) synchronous MOSFET driver designed for upper and lower power n-channel MOSFETs in synchronous rectified converter topologies. This driver, combined with power MOSFETs and one of Linear's DC/DC controllers, form a complete high efficiency synchronous converter.

The LTC4444 can source up to 2.5A with a 1.2? pull-down impedance for driving the top MOSFET and source 3A with a 0.55? pull-down impedance for the bottom MOSFET, making it suitable for driving high gate capacitance, high current MOSFETs. The device can also drive multiple MOSFETs in parallel for higher current applications. The fast 8ns rise time, 5ns fall time of the top MOSFET, and 6ns rise time, 3ns fall time of the bottom MOSFET when driving a 1,000pF load minimize switching losses. Adaptive shoot-through protection is integrated to minimize dead time while preventing both the upper and lower MOSFETs from conducting simultaneously.

In addition, the driver is configured for two supply-independent inputs. The high-side input logic signal is internally level-shifted to the bootstrap supply, which may function at up to 114V above ground. This part drives both upper and lower MOSFET gates over a range of 7.2-13.5V.

The LTC4444EMS8 and LTC4444IMS8 are offered in a thermally enhanced MSOP-8 package with prices starting at $1.69 for 1000-piece quantities.




Article Comments - High-speed MOSFET driver supports st...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top