Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

Transceiver claims 100Mbit/s data rate, robust ESD protection

Posted: 21 Dec 2007 ?? ?Print Version ?Bookmark and Share

Keywords:transceiver? fast data transmission? ESD protection?

ISL3259E

Intersil Corp. has introduced the ISL3259E RS-485/RS-422 transceiver, a next-generation interface IC that combines what is said to be the industry's fastest data transmission rate (100Mbit/s) with a low 2.6mA supply current and rugged 15kV IEC61000-4-2 ESD protection.

The ISL3259E allows manufacturers to design the most dependable high data rate systems created, giving unprecedented precision control in factory automation applications or doubling the throughput in applications requiring large data transfers.

The majority of higher-end RS-485/RS-422 transceivers are limited to data rates up to 40Mbps. Precision control of motor positioning in factory automation systems requires high-speed data transfers.

ISL3259E integrates ESD protection that is between 33 percent and 100 percent greater than the ESD ratings of other high-speed transceivers in the market. This allows for the elimination of external protection components and saves on total costs. This device's ESD level is rated at 15kV air gap and 8kV contact discharge to IEC61000-4-2 on the RS-485/RS-422 bus pins and 9kV HBM on all of the other pins.

The ISL3259E has enhanced output differential voltage drive (Vod). The transceiver Vod is specified to be 40 percent greater then the voltage specified by the RS-485 protocol. This enhancement and rugged features make the ISL3259E well suited for factory automation applications. Other applications also profit from the increased noise immunity and enhanced data integrity provided by the extra large Vod. Parallel networks, like SCSI "fast 40" systems, benefit from the 100Mbps data rate and the low transceiver and receiver skews, as well as the 4nS part-to-part skews. In addition, the receiver outputs deliver superior low state currents (typically >30mA at Vol = 1V) to ease the design of optically-coupled, isolated networks.

The device also has a full fail-safe receiver, current limiting and thermal shutdown for driver overload protection, and hot plug transmitter and receiver outputs. These features protect the ISL3259E outputs and prevent data corruption when cable faults occur or when a new node is added to an active bus. This means systems will have enhanced data integrity and will be more rugged when using the ISL3259E.

ISL3259E is packaged in a small 3mm x 3mm DFN package for space-savings along with an 8-lead MSOP package option. The tiny package has a 70 percent smaller PCB footprint than standard 8-lead SOIC offerings and an integrated thermal slug provides approximately a 40 percent improvement in thermal resistance compared to the SOIC package.

The ISL3259E is available in DFN and MSOP packaging in 1,000 unit quantities for $1.33 each.




Article Comments - Transceiver claims 100Mbit/s data ra...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top