Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

Implementing digital lock-in amplifiers using the dsPIC DSC

Posted: 23 Jan 2008 ?? ?Print Version ?Bookmark and Share

Keywords:lock-in amplifier? DSC? sensors?

Lock-in amplifiers use phase-sensitive detection to measure the presence of small signals buried in large amounts of noise. By measuring the coherent system response from an incoming AC signal, the digital lock-in amplifier can detect even minute changes. Both magnitude and phase can be used to characterize the system.

Conventionally, lock-in amplifiers use complicated (and expensive) analog circuitry to perform the phase-sensitive detection and filtering. However, modern digital signal controllers (DSCs), such as the dsPIC30F and dsPIC33F families, can be used to remove large amounts of the analog circuitry by

Assuming the amplifier in this example has a performing the necessary operations in software. This capability provides a number of additional benefits including increased reliability, resistance to temperature and aging effects, and the ease with which the system can be modified in the field. By using the built-in signal processing capabilities of the dsPIC33F, it is possible to perform high-speed, high-accuracy measurements on sensors such as strain gauges. The same technique can be applied to other noisy systems such as capacitive sensors or the measurement of modulated light levels.

View the PDF document for more information.




Article Comments - Implementing digital lock-in amplifi...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top