Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

Infineon unveils next-gen powertrain MCUs

Posted: 31 Jan 2008 ?? ?Print Version ?Bookmark and Share

Keywords:powertrain MCUs? processor? microcontrollers?

With a new family of 32bit MCUs, Infineon hopes to attract designers of next-generation powertrain ECUs. The devices allocate sufficient number crunching capacity to run sophisticated engine control algorithms required to reduce exhaust gas emissions and fuel consumption at the same time, Infineon claims.

The new MCU family, dubbed 'Audo Future' is based on the vendor's Tricore architecture which incorporates a main processor and a separate Peripheral Control Processor (PCP), both with 32bit data bus, on a single chip. According to Axel Hahn, director application line powertrain for Infineon, the Audo Future line has a larger on-chip memory and runs at higher clock frequencies compared to earlier Tricore implementations.

"New EU regulations such as the Euro5 standard which will be in force from 2009 require 25 percent lower emissions. This can only be achieved by tight control of many different parameters in the motorfor instance through very exact control of valve positions, fuel injection timing and amount and ignition timing. With advanced piezo-based injection control mechanisms, the entire injection process is divided into 16 different doses for each ignition cycle," Hahn explained. "OEMs today use complex computing models to calculate the ideal timing. This all calls for an enormous computing power."

In addition, motor control ECUs have to deal much more with communication compared to earlier generations, he said. For this reason, the Audo Future chips have several CAN modules on board; one model is equipped with an integrated FlexRay peripheral. "We expect the OEMs to bring FlexRay-equipped vehicles into volume production in the 2010/2011 time frame," Hahn explained.

To improve cost-effectiveness, Infineon integrated functions earlier implemented as a separate ASIC onto the MCU. An instance is the knock control system, which is now integrated as a peripheral module and, in part, in software.

In terms of software, Infineon follows an open approach, said Hahn. While the company provides the Autosar layers required to run the communication protocols for the on-chip CAN and FlexRay controllers, these software modules also can be sourced from third parties. Operating systems are available from external partners.

- Christoph Hammerschmidt
EE Times Europe




Article Comments - Infineon unveils next-gen powertrain...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top