Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Networks

AAT1275 Eval: Boost converter with USB power switch

Posted: 05 May 2008 ?? ?Print Version ?Bookmark and Share

Keywords:USB? power switch? boost converter? AAT1275 application note? AnalogicTech?

AnalogicTech's AAT1275 evaluation board provides a platform for test and evaluation of the AAT1275 switching boost converter with USB power switch. The evaluation board demonstrates suggested size and placement of external components to achieve 5V output voltages and up to 500mA output load current to support USB VBUS operation from an input supply as low as 2.7V. The external components are selected for small size to suit portable applications while the layout has been optimized to achieve high efficiency and low output noise with the TSOPJW-12 package. The design operates across an input voltage range from 2.7V to 5V. This document provides details on the operation and test of the AAT1275 evaluation board. Modification of the resistor divider network (R2, R3) allows different output voltages. The load switch current limit level at OUT2 is determined by RSET (R4) value. When the OUT2 pin load current has exceeded current limit level, the AAT1275 shuts down to minimize the power dissipation and component stresses under overload and short circuit conditions.

View the PDF document for more information.

Article Comments - AAT1275 Eval: Boost converter with U...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top