Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

Good finds: Surveilance kit for $99.99

Posted: 23 May 2008 ?? ?Print Version ?Bookmark and Share

Keywords:surveillance camera? TV monitor? MCU?

Walking down the do-it-yourself security aisle at our local Fry's Electronics, a $99.99 surveillance kit caught my eye among an array of products of self-serve video monitoring.

A hundred bucks for a two-camera, one-base station, 2.4GHz wireless audio/video monitoring setupcapable of near-zero-light operation, given the product's built-in IR illumination ring with each cameraseemed like an impressive deal.

Branded as the SecurityMan NiteCam2, the design is a re-badged product from Shenzhen AEE Wireless.

The product is simple to set up. Each of the two weather-resistant, microphone-equipped bullet cameras needs only an AC outlet for an adapter to transmit audio and color video back to a single base station.

The ISM 2.4GHz bands used by the cameras are established via a DIP switch on the base unit, and output from the base is via RCA-jack composite video and monaural audio for use with any TV monitor. A 100m range in clear line of sight is claimed, but you can bank on something far less in a real-world installation.

SecurityMan NiteCam2 is a two-camera, one-base station, 2.4GHz wireless audio/video monitoring setup capable of near-zero-light operation. (Click to view teardown.)

What's inside
The cameras contain the lensed imager, microphone and RF transmission circuitry, along with a ring of IR LEDs to provide human-invisible flood illumination for nighttime use. AEE claims 5-lux minimum visible-light illumination and 0-lux (with IR on) sensitivity to 7m.

Transmission signals come over 2414-, 2432-, 2450- or 2468MHz center frequencies (18MHz channel separation) for some combination of multicamera utility and simple interference avoidance.

An Omnivision OV7930 provides 510 x 492 NTSC video output directly, handling everything from raw image collection to gain control, auto color balance and NTSC formatting/conversion.

The camera electronics consist of a Shenzhen Bojuxing Industrial Development BJ8P153 8bit MCU ROM controller and RichWave RTC6701 CMOS 2.4GHz FM/FSK (frequency-shift-keying) transmitter running at 10mW of RF output power.

Although the RichWave part supports digital FSK capability, the design uses only the device's simpler analog RF FM function to up-convert the NTSC output of the Omnivision image sensor. A simple wire antenna delivers RF from a stub protruding out the rear of the camera.

Pure analog
With a less-sophisticated FM scheme, there is relatively little protection against outside interferers in the increasingly crowded ISM band. Lacking the ultratight channels, error-correction and/or coding for interference-resistance possible with a more-complex digital radio, the SecurityMan's design leads to some compromise. The pure-analog approach wins out at the expense of radio robustness.

The base station receiver antenna is an unbalanced dipole antenna (stripped coax, really), which feeds an apparent discrete RF front end. The base station cycles through each channel selected, affecting changes to the RichWave RTC6503 frequency synthesizer with built-in VCO, whose output mixes with the received signal to get to the 480MHz IF used in the design.

After the mixer IF output is cleaned up in a surface acoustic wave (SAW) filter, audio and video signals must be further isolated. The former is addressed in an Atmel (Temic) U2860-B dual-channel FM sound demodulator, with only one of two channels needed for the SecurityMan's monaural output.

Baseband composite video is derived in a Zarlink-marked SL1461SA PLL FM demodulator, now seemingly an orphan part, given Zarlink's sale of its tuner and demodulator device business to Intel. Intel no longer lists the product as an active device in its demodulator family.

Outside of the A/V receiver circuits, the primary remaining base unit electronics are a 5V regulator (LM7805) and another 8bit MCU. Elan Microelectronics' EM78P153 MCU houses its own stash of about 7Kbit of one-time PROM. DIP-switch channel-select, reset, RF module control and blinky-light duties are all handled in this small, 14-pin device.

The electronic design relies on inexpensive, low-integration devices, and the CMOS sensor is arguably the most complex IC present.

I couldn't help but admire the cast-metal enclosures for the bullet cameras. These housings may represent the single most-expensive part of the total hardware BOM, surely under $50.

Despite the wireless descriptor, I was overwhelmed by the amount of wired stuff that came in the blister-packed setup. Three ac adaptersone for the base and one for each cameramade for quite a bowl of spaghetti, despite the reliance on RF links. If only we could handle power as conveniently and wire-free as the A/V feeds seen in the SecurityMan/AEE design.

- David Carey
President, Portelligent





Article Comments - Good finds: Surveilance kit for $99....
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top