Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Embedded
?
?
Embedded??

Crosstalk measurement, extraction and validation in 10Gbps serial systems

Posted: 26 Jun 2008 ?? ?Print Version ?Bookmark and Share

Keywords:application note? backplane system? connector crosstalk?

SEARAY connector was evaluated to determine its suitability in the high-speed backplane system.

A system based on the Molex SEARAY connector and IBM BladeCenter backplane was examined. A new and broadly applicable methodology was demonstrated to measure connector crosstalk using both frequency domain and time domain instruments.

After applying adjustments, the time domain and frequency domain results correlated very well. This validated the connector model data and demonstrated that system level simulations could be done with a high degree of confidence to determine the impact of connector crosstalk. It is clear from the simulation results that careful assignment of connector pins is critical because, victim lines surrounded by two near end aggressors could significantly reduce channel margin at 10Gbit/s.

View the PDF document for more information.





Article Comments - Crosstalk measurement, extraction an...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top