Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > RF/Microwave
?
?
RF/Microwave??

Chip networks home via UWB, coax, Ethernet

Posted: 27 Jun 2008 ?? ?Print Version ?Bookmark and Share

Keywords:UWB chipset? Ethernet? wireless home networking?

Sigma Designs has developed a second-generation UWB chipset for home networks that can simultaneously run UWB over wireless and coax at rates up to 370Mbit/s while maintaining a GbE link. CoAir is aimed to serve a variety of STBs, routers and gateway devices on home networks.

Consumer systems will use the chip to ship data and media around a home over coax at distances of up to 330ft while streaming content wirelessly within a room at distances up to 20m, said Hung Nguyen, general manager of Sigma's wireless group. By providing a GbE link, the company hopes its silicon becomes the single networking chip set needed for many home systems.

Sigma announced CoAir at the Connections conference on home networking this week. At the event, Panasonic's chief technology officer will give a keynote address on the value of unifying home nets around the pending ITU G.hn standard.

Home networks have long been fragmented into options for a variety of different media. A number of top computer and consumer companies are backing the ITU G.hn effort as the best hope to unify the options.

"We are a contributing member to G.hn, but it is in a very early stage," said Nguyen.

Sigma's CoAir chip delivers higher data rates and more flexibility than competing parts based on the Multimedia over Coax standard. PulseLink Inc. offers a UWB chip that handles transmission over wireless or coax at rates up to a Gbit/s. However, the chip uses proprietary technology and does not conform to the WiMedia Alliance specifications that the CoAir chip uses.

The WiMedia group is still defining a standard for UWB over coax. Nguyen said Sigma would modify CoAir as needed to comply with that spec when it is done. An initial draft is expected to be available to WiMedia members by year-end.

The CoAir chip set includes a 9mm x 9mm RF chip and a 15mm x 15mm baseband. Together they consume up to 1.5W and are sampling with production costs expected to be $20-$30, depending on volume.

Nguyen would not detail the approach Sigma is using to allow the chip to send data over wireless and coax simultaneously. However, he did say the channels share some common silicon components.

Sigma released its first UWB chip a year ago. The Windeo device is aimed at point-to-point links within a room and was based on technology the company acquired from Blue7 Communications.

"Over the next few years we expect to increase the data rates for our chips over both wireless and coax links and reduce the cost of the chips," said Nguyen. "It's very feasible to get well below $20 and even below $10 for simple adapter devices that don't support higher speeds," he said.

CoAir uses WiMedia's WiNet standard for carrying IP over UWB to stream media wirelessly. The chip can also support a separate protocol adaptation layer (PAL) for wireless USB.

The WiMeda group is working on a standard that would let chips simultaneously support multiple PALs so, for example, they could link to wireless USB devices such as digital cameras while streaming media to a TV or computer over WiNet.

- Rick Merritt
EE Times





Article Comments - Chip networks home via UWB, coax, Et...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top