Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Controls/MCUs
?
?
Controls/MCUs??

Freescale fortifies QorIQ communications platforms

Posted: 08 Jul 2008 ?? ?Print Version ?Bookmark and Share

Keywords:QorIQ communication platform? multicore? network application?

Freescale Semiconductor presents the first two product series based on its QorIQ communications platforms for next-generation multicore networking applications. The P1 and P2 platform series include Freescale's first communications processors based on 45nm technology. Utilizing the e500 Power Architecture core, these devices offer a multicore migration path for PowerQUICC II Pro and PowerQUICC III processor customers.

The QorIQ P1 and P2 platform series consist of dual- and single-core products that are pin- and software-compatible with each other, offering five interchangeable, cost-effective solutions. The P1 platform series includes the P1020, P1011 and P1010 communications processors, and the QorIQ P2 series consists of the P2020 and P2010 communications processors. From a single core at 400MHz (P1010) to a dual core at 1200MHz (P2020), the P1 and P2 families offer a broad frequency range within a pin-compatible package.

All devices in these two platforms share the e500 Power Architecture core and are fully software compatible with existing PowerQUICC processors, The dual core members of the QorIQ P1 and P2 series (P1020 and P2020) support symmetric and asymmetric multiprocessing, thereby enabling performance scaling through either thread-level or application-level parallelism, claims Freescale.

QorIQ P1
Freescale built P1 family with very low-power, dual (P1020) or single (P1011 and P1010) 800MHz Power Architecture e500 cores and includes 256Kbyte L2 cache with error correcting codes (ECC). Providing a migration path from Freescale's PowerQUICC II Pro processor family, the P1 series offers a performance upgrade in the same power envelope, which enables fan-less design, as well as a migration path to dual-core if required for increased performance. According to Freescale, the series provides solutions for the 400MHz to 800MHz per core performance range, along with advanced security and a rich set of interfaces.

With a scalable platform, these P1 devices can be used in a range of applications such as multiservice gateways, Ethernet switch controllers, wireless LAN access points and high-performance general-purpose control processor applications with tight thermal constraints.

QorIQ P2
The P2 platform communications processors deliver dual core processing performance in a single core power budget. With dual and single e500-based cores (P2020 and 2010) ranging from 800MHz to 1.2GHz, the P2 series offers a compelling migration path for existing PowerQUICC III processor users, says Freescale. The P2 series has a 512Kbyte L2 cache with ECC that may be partitioned between cores and is configurable as SRAM and stashing memory. In addition to three advanced Ethernet controllers with advanced packet parsing, flow control, quality of service features, and IEEE 1588 time-stamping, four Serdes lanes can be portioned across two Serial RapidIO ports, three PCIe ports and two SGMII ports. The 64bit SDRAM controller supports both DDR2 and DDR3 for future-proofing against memory technology migration, and it supports ECC, a check-off item for any high-reliability system. Other interfaces include SPI, USB, SD/MMC flash support, a DUART, a local bus, and dual I2C.

The QorIQ P2 platform products serve in a wide range of applications, especially networking and telecom line cards and base station channel cards with constrained thermal budgets. According to Freescale, the ability to run two copies of an operating system leads to decreased downtime and the ability to upgrade software on the fly. This enables increased reliability, as does ECC on the memory controller. Dual Serial RapidIO interfaces align with the backplane and DSP interconnects being used in base stations. Additional applications, which benefit from this integration and performance, include unified threat managers, carrier-class VoIP media gateways and wireless media gateways.

The first members of the P2 series are expected to sample to lead customers in Q4, with beta samples scheduled for Q1 09. The first members of the P1 series are expected to begin sampling in 2009.





Article Comments - Freescale fortifies QorIQ communicat...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top