Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Optoelectronics/Displays
?
?
Optoelectronics/Displays??

Spread-spectrum clocking reception for displays

Posted: 12 Sep 2008 ?? ?Print Version ?Bookmark and Share

Keywords:LVDS interfaces? spread-spectrum clocking? displays?

Consumer display applications like flat-panel displays and video players commonly use high-speed low voltage differential signaling (LVDS) interfaces to transfer video data. To address electromagnetic compatibility (EMC) issues, spread-spectrum clocking can be used to reduce th impact of radiated energy produced by these signals. When a spread-spectrum clock is used as the source from which these signals are derived, the radiated energy is spread across a range of frequencies, effectively reducing the peak energy at any one frequency.

This application note shows that a spread-spectrum clock will drive the LVDS interfaces of Spartan-3E and Extended Spartan-3A family devices with no adverse effects on a system's performance. It describes how to estimate the maximum spread-spectrum clock modulation frequency for the Digital Clock Manager (DCM) and describes a simple test setup to evaluate the effects of the spread-spectrum clock on a typical LVDS communications path. Note: This application note applies to Spartan-3E and Extended Spartan-3A family devices only.

View the PDF document for more information.





Article Comments - Spread-spectrum clocking reception f...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top