Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Interface

Using C and I/O pins to interface 8051 MCUs with I?C serial EEPROMs

Posted: 09 Sep 2008 ?? ?Print Version ?Bookmark and Share

Keywords:MCU interface? serial EEPROM? application note? I²C?

The 24XXX series serial EEPROMs from Microchip Technology support a bidirectional, 2-wire bus and data transmission protocol. The bus is controlled by the MCU (master), which generates the Serial Clock, controls the bus access and generates the Start and Stop conditions, while the 24XXX serial EEPROM works as slave. The 24XXX serial EEPROMs are I?C compatible and have maximum clock frequencies ranging from 100kHz to 1 MHz.

The main features of the 24XXX serial EEPROMs are:

? 2-wire serial interface bus, I?C compatible
? EEPROM densities from 128bit to 512Kbit
? Bus speed from 100kHz to 1MHz
? Voltage range from 1.7V to 5.5V
? Low power operation
? Temperature range from -40C to +125C
? Over 1,000,000 erase/write cycles
? Up to 8 devices may be connected to same bus

This application note is part of a series that provide source code to help the user implement the protocol with minimal effort.

View the PDF document for more information.

Article Comments - Using C and I/O pins to interface 80...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top