Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > T&M
?
?
T&M??

TM500 LTE multi-UE guarantees speedier development

Posted: 16 Oct 2008 ?? ?Print Version ?Bookmark and Share

Keywords:LTE? multi-UE TM500? handset?

TM500

Aeroflex introduces the LTE version of its TM500 multi-handset (multi-UE) test mobile designed to enable infrastructure equipment vendors accelerate the pace of their LTE development projects. At the same time, Aeroflex also announced that it has won a contract to supply a major infrastructure equipment vendor with the TM500.

Up to 32 LTE handset UEs are provided in one multi-UE test mobile, which simplifies complex tasks such as functional network testing with multiple UEs and performance measurement of resource scheduling algorithms, claims Aeroflex. An LTE cell can be loaded with multiple UEs using a repeatable time profile in a controlled test environment. All 3GPP UE categories will be supported with maximum aggregate data rates of up to 75Mbit/s on the uplink and 300Mbit/s on the downlink.

According to Aeroflex, the TM500 LTE Multi-UE provides the ability to operate multiple UEs on the same test platform using a single point of control. In addition to functional multi-UE testing, the use of the same test platform enables specific tests that require UE co-ordination for which it is not feasible to use independent handsets. Such tests include contention between UEs attempting to access the network together and the ability to check a network's response if multiple UEs behave unexpectedly or abnormally together. However, each UE still provides 3GPP LTE functionality with its own independent software stack to ensure that it is representative of an LTE handset.

Handset configuration and measurement capabilities are also included to provide infrastructure engineers with the low-level UE access and internal UE visibility they require to properly test and debug the eNode-B (LTE basestation) and network. The performance measurement capabilities of the TM500 LTE Multi-UE can be used to measure, optimize and demonstrate functionality such as the resource scheduler performance of the eNodeB.

In addition to its use for functional and performance testing, TM500 Multi-UE Test Mobile can also be upgraded to support hundreds of UEs for load and stress testing in conjunction with third-party capacity test products.





Article Comments - TM500 LTE multi-UE guarantees speedi...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top