Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Embedded
?
?
Embedded??

ATCA SBC with Intel Xeon designed for 4G apps

Posted: 08 Apr 2009 ?? ?Print Version ?Bookmark and Share

Keywords:single board computer? SBC AdvancedTCA? Xeon Intel? 4G application?

Promentum ATCA-4500

RadiSys Corp. has released the Promentum ATCA-4500, a new AdvancedTCA (ATCA) single board computer (SBC) utilizing the new Intel Xeon processor 5500 series.

The ATCA-4500 combines high performance with large memory capacity and expansion flexibility to address advanced control, gateway and telecom server functions for a broad set of 4G applications including Long-Term Evolution (LTE), WiMAX, Network Management Systems, IP Multimedia Subsystem. The ATCA-4500 represents seventh-generation RadiSys ATCA blade technology delivering on the promise of Moore's lawdoubling the number of transaction or subscriber units that telecom service providers can handle per ATCA slotthereby, dramatically reducing cost per unit.

"We bring true innovation and system level thinking to every product we design and the Promentum ATCA-4500 encapsulates the best in single board computers," said Anthony Ambrose, RadiSys VP and general manager, communications networks. "As the market leader in Integrated ATCA System deployments, the ATCA-4500 complements our other market leading products using DSP, packet processing and switching technology in building the world's best 10G ATCA platform."

RadiSys' ATCA-4500 has been optimized to meet telecom equipment manufacturer (TEM) requirements for easily integrating into an existing ATCA chassis and for supporting multiple storage options and OS virtualization. The ATCA-4500 features an innovative virtualization solution that allows TEMs to streamline the complexities of their network element configurations and ease the porting of legacy application software and operating systems.

The ATCA-4500 is based on the Intel processing technology enabling TEMs to use higher performing silicon at the system level. A single Intel Xeon processor 5500 series will outperform the previous generation of Intel Xeon processors 5400 series by up to 25 percent using standard computing benchmark.* The ATCA-4500 is based on single socket design technology and provides TEMs with higher performance while being packaged such that it is fully upgradeable for next generation performance, safeguarding their investments in hardware by avoiding costly redesigns when new processing technology from Intel hits the market.

"Intel's highest performing processor, the Intel Xeon processor 5500 series, is designed to meet the performance and virtualization requirements for the most demanding storage, security and communications infrastructure applications," said Doug Davis, VP and general manager, embedded and communication group of Intel. "This enables the RadiSys Promentum ATCA-4500 to support both legacy and next generation applications on the same virtualized communications element without sacrificing performance."

"TEMs must increasingly look to COTS and ATCA to provide the processing capacity to keep up with increasing network and application complexity," said Lee Doyle, VP and general manager, Network Infrastructure, IDC. "The ATCA-4500 is a cost effective solution to allow TEMs to increase the subscriber density per system."

Feature-packed
The ATCA-4500, with the new Intel Xeon processor L5518, has been designed to offer the highest performance while minimizing the total cost of ownership. It offers more than a 50 percent increase in performance per watt per dollar over a dual socket Intel Xeon processor L5408 based ATCA blade. The processor and feature set were selected so it could pass the NEBS thermal requirements in chassis already deployed in the field, eliminating the need for a fork lift upgrade.

Support for a massive 8 DIMM array of VLP DDR3 scales up to 64Gbyte of memory while providing cost effective options for applications with lower density memory requirements. The board also offers multiple storage options, including RAID, SAS/SATA, solid state USB flash drives and supports iSCSI boot, allowing TEMs to achieve their storage requirements around performance, flexibility, reliability and cost.

For low-level software, the ATCA-4500 is based on Extensible Firmware Interface (EFI), which is a significant improvement over the old legacy BIOS firmware. The EFI provides a pre-operating system shell where customers can build and execute EFI applications, such as setup, OS install, diagnostic or configuration utilities. Support for extended Intel Virtualization Technology (VT-x and VT-d) on the board decreases the overhead associated with virtualization, making it the ideal platform for use cases that require virtualization. The ATCA-4500 has been tested against the guidelines offered by CP-TA to ensure interoperability across the ATCA ecosystem.

The ATCA-4500 will be available as a building block or fully validated and integrated into the RadiSys family of platforms which include 2, 5, 14 and 16 slot systems. The board has been validated with third-party hardware including products from SANBlaze, Interphase and Astute Networks.

In addition, the SBC supports mid-height advanced mezzanine card (AMC), supporting Ethernet, PCIe, SAS and is already validated with various I/O and storage AMCs. It also features optional dual user flash up to 16Gbit each. The ATCA-4500 also supports Hardware RAID 0/1 as well as dual 10/1Gbit Ethernet fabric interface.

RadiSys ecosystem
In addition to the ATCA-4500's rich feature set, RadiSys has equipped its industry leading REDI lab with the ATCA-4500, which has enabled its ecosystem partners to begin early OS, middleware and application integration prior to market availability. This complete application ready development approach has been able to speed RadiSys' partners' development activities and reduce costs through innovative remote development capabilities found in the REDI lab.

The ATCA-4500 supports Wind River's Carrier Grade Linux platform. The board will also support Red Hat Enterprise Linux 5.0 and MontaVista CGE 4.0 and 5.0 to cover RadiSys' entire customer base. Certification is also planned with VMware ESX 3.5.

The Promentum ATCA-4500 is shipping now in limited quantities with production shipment in Q3. It is available for demonstration in the REDI lab.





Article Comments - ATCA SBC with Intel Xeon designed fo...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top