Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Amplifiers/Converters

Transimpedance amp meets GPON Class B+ requirements

Posted: 14 Apr 2009 ?? ?Print Version ?Bookmark and Share

Keywords:amplifier transimpedance? GPON? photodiode avalanche?

PHY1096 transimpedance amplifier

Phyworks has launched a high-sensitivity transimpedance amplifier that enables lower cost PIN photodiodes in the receive path of customer premises GPON applications to replace costly avalanche photodiodes (APDs).

The reduction in component cost combined with elimination of the high voltage bias circuitry and lower yields associated with APDs is expected to help increase fiber-to-the-x (FTTx) GPON deployment. Its intrinsic input referred noise level is 85nA. The PHY1096 transimpedance amplifier offers the lowest noise performance at 2.5Gbit/s and has been designed to meet GPON Class B+ requirements with sensitivity better than -30dBm when using a PIN photodiode.

The PHY1096 is based on a pure CMOS process that operates from a 3.3V power supply. It integrates a 34k transimpedance low noise front-end amplifier, automatic gain control and a highly stable output stage. An output is also provided, which can be used to implement a signal strength monitor circuit. For ease of interfacing, this is designed to sink or source a current equal to the PIN photodiode current. The PHY1096 is available in die form for mounting on a header to create a ROSA when combined with optics and photodiode. Operating temperature range is -40C to +85C. The PHY1096 high sensitivity transimpedance amplifier from Phyworks is priced at $2.00 in volume.

Article Comments - Transimpedance amp meets GPON Class ...
*? You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.

Back to Top