Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Networks
?
?
Networks??

Junction box enables automated PV modules

Posted: 27 May 2009 ?? ?Print Version ?Bookmark and Share

Keywords:junction box? photovoltaic? PV module?

Molex Inc. has launched an innovative junction box that enables automated photovoltaic (PV) module production at the InterSolar 2009 exhibition.

The Molex Junction Box addresses a wide diversity of customer requirements while, with its compact and light overall design, facilitates precise positioning on to the PV module by a pick and place machine or industrial robot.

Molex has designed a new board termination system for the base part of the two-piece Junction Box. The lower section can be positioned on to the PV module by a pick and place machine or industrial robot and the formed springs, which make direct contact with the exposed conductor strips on the PV panel, are then spot welded by means of an automated solder or laser welding process.

The cover of the Molex Junction Box, which contains the bypass diodes connections, moisture protection filter and PV cable terminals, can simply be placed on top of the base that has already been installed on to the PV module. The operation can be automated as part of the production sequence.

The upper and lower sections of the junction box interlock via a clip mechanism, which also serves as a pre-centering aid so that the upper and lower sections can be easily brought together and securely interlocked during automatic placement. The asymmetrical polarized arrangement of the locking clips prevents the upper section from being fitted incorrectly.

- Paul Buckley
Power Management DesignLine Europe





Article Comments - Junction box enables automated PV mo...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top