Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Interface
?
?
Interface??

Detection of RS-485 signal loss

Posted: 03 Jun 2009 ?? ?Print Version ?Bookmark and Share

Keywords:signal loss detection? RS-485? differential window comparator?

Fault isolation and safety shutdown protocols are critical in many industrial, telecommunication, automotive and data processing systems. While built-in test routines may provide fault isolation when the system is offline, real-time fault detection requires continuous monitoring of signals. These systems often use RS-485 to share data between sensors, actuators, single-board computers or communication processors.

RS-485 signals are differential, using two signal wires to transmit data, and detection of valid signal levels requires a differential window comparator. Designing this circuit function is complicated by the wide common-mode range of RS-485 signals and, in many cases, the availability of only positive supply rails.

This article shows how a differential window comparator can be constructed with the passive-failsafe feature of two SN65HVD3088E RS-485 transceivers and an AND gate. It also provides theory of operation, the basic circuit schematic, test results and other design considerations.

View the PDF document for more information.





Article Comments - Detection of RS-485 signal loss
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top