Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
?
EE Times-Asia > Power/Alternative Energy
?
?
Power/Alternative Energy??

DC/DC charger minimizes heat, charge time

Posted: 02 Jul 2009 ?? ?Print Version ?Bookmark and Share

Keywords:DC/DC charger? power smart? heat charge time?

Maxim Integrated Products unveiled the MAX8903A, a switch-mode DC/DC charger with Smart Power Selector circuitry. The MAX8903A charger uses a high switching frequency (4MHz, typ) to minimize heat and charge time, while allowing the use of tiny external components.

To further reduce solution size, the MAX8903A includes all power switches and current-sense circuitry required for charging and switching the load between battery and external power. This device is optimized for rechargeable, 1-cell Li-ion (Li+) batteries, making it suitable for smart phones, mobile Internet devices, portable media players, portable navigation devices, digital still cameras and ultra-mobile PCs.

The MAX8903A can operate with either separate inputs for USB and AC-adapter power or from a single input that accepts both. When external power is connected, the Smart Power Selector circuitry allows the system to operate with no battery or a deeply discharged battery. It automatically switches the system load from the battery and makes the best use of limited USB or adapter power while charging the battery from input power not used by the system.

The converter on the DC input has a wide, 4.1V to 16V input range for direct charging from USB, AC-adapter and car charger inputs; the dedicated USB input operates from 4.1V to 6.6V. The DC-input current limit is adjustable up to 2A, and both the DC and USB inputs support 100mA, 500mA and USB suspend modes. Charge current is adjustable up to 2A to support a wide range of battery capacities. Other MAX8903A features include thermal regulation, overvoltage protection, charge-status and fault outputs, power-OK monitors, a battery thermistor monitor and a charge timer.

The MAX8903A is available in a 4mm x 4mm, thermally enhanced, 28-pin TQFN package and is fully specified over the -40C to +85C extended temperature range. Prices start at $2.55 (1,000-up, FOB USA). An evaluation kit is available to speed designs.





Article Comments - DC/DC charger minimizes heat, charge...
Comments:??
*? You can enter [0] more charecters.
*Verify code:
?
?
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

?
?
Back to Top